TDS_InJet_888_CRRD_1F_ENG.pdf - 第2页

InJet ® 888 CRRD – 1F TECHNICAL DATA SHEET 2 www.dct.cleaning GENERAL INFORMATION The InJet ® 888 series cleaning systems represent unique horizontal Spray-In-Air technology developed and manufactured by DCT. Systems wit…

100%1 / 8
REFLOW and SOLDERING PARTS cleaning
PCB cleaning
STENCIL, MISPRINT, SQUEEGEE cleaning
www.dct.cleaning
TECHNICAL DATA SHEET
InJet
®
888 CRRD – 1F
www.dct.cleaning
CHAMBER
InJet
888 CRRD – 1F
InJet
®
888 CRRD – 1F 
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The InJet
®
888 series cleaning systems represent
unique horizontal Spray-In-Air technology developed
and manufactured by DCT.
Systems with horizontal spraying technology excel in high
pressure and high liquid  ow. Thanks to their large process
chamber they have a large capacity basket, which also
facilitates loading and unloading of the cleaned parts.
The basket can be pulled out of the cleaning chamber on
built-in rails or onto a separate loading and handling trolley.
The InJet
®
888 CRRD-1F is designed primarily to remove  ux
residues from solder boards.
The designation 1F indicates a 1-storey solution,
primarily intended for cleaning larger parts. It is possible to
insert and clean a stencil or misprints at the same time.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
InJet
®
888 CRRD – 1F 
TECHNICAL DATA SHEET
3
www.dct.cleaning
Application
name
Recommended
application
Recommended
temperature
Total cleaning
process time
Capacity
per 8 hours
Re ow and soldering parts
30 – 50°C 86 – 122 °F 40 min. 240 *
PCB
35 – 55°C 95 – 131 °F 60 min. 1008 *
Stencil, misprint, squeegee
20 – 40°C 68 – 104 °F 20 min. 24
4 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
C
R
D
R
CLEANING
PRE–RINSING
RINSING
DRYING
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND:
R
R
D
C