TM6192.FeederIDLogFunctionSpecification.pdf - 第2页
1. Applic able models and sof tware versions Applicable items and software version are as below . T able1.1 Applicable models and software version Item Name Sof tware V ersion Remarks YS series mounters, YG300, YG12 seri…
Feeder ID Log Function Specification
Contents
Feeder ID Log Function Specification ................................................................................... 1
1. Applicable models and software versions ......................................................................... 2
2. Outline ..............................................................................................................................2
3. Detail................................................................................................................................. 2
3.1 Feeder ID log screen................................................................................................... 2
3.1.1 Display item ..........................................................................................................3
3.1.2 “Save Log” button ................................................................................................. 4
3.1.3 “Reset” button ....................................................................................................... 5
3.1.4 “Option” button ...................................................................................................... 5
3.2 Feeder ID log file ......................................................................................................... 6
3.2.1 Feeder ID individual log file...................................................................................6
3.2.2 Feeder ID daily log file .......................................................................................... 6
3.2.3 Feeder ID log backup file ......................................................................................7
3.3 Feeder ID log file format.............................................................................................. 7
4. Setting ..............................................................................................................................9
4.1 Setting in “ID log setting” screen ................................................................................. 9
4.2 Setting in “Unit log” screen ........................................................................................ 11
4.3 Setting in “Setting Detail History” screen ................................................................... 11
5. Error Message ................................................................................................................ 12
Rev Version Chapter Revised Contents
00 VGOS V3.42STD R1.000
VGOS V4.42STD R1.000
All Created
1. Applicable models and software versions
Applicable items and software version are as below.
Table1.1 Applicable models and software version
Item Name Software Version Remarks
YS series mounters,
YG300,
YG12 series mounters
VGOS V3.42STD R1.000 or later SS feeder, ZS feeder, CLi
feeder, FSi feeder only
YSM40 VGOS V4.42STD R1.000 or later SS feeder, ZS feeder only
2. Outline
The feeder ID log function is able to manage the information about feeder usage condition,
error frequency, etc. for each one feeder (each feeder ID) by identifying feeder ID of each
feeder. However, target feeders are only SS feeder, ZS feeder, CLi feeder, and FSI feeder.
To use this function, it is necessary to validate the feeder maintenance notice function.
When the first installation, the feeder maintenance notice function becomes effective by
default.
3. Detail
This chapter explains about the feeder ID log screen and the feeder ID log file.
3.1 Feeder ID log screen
The feeder ID log is displayed at [Unit Log] - [Feeder ID] tab.
“Feeder ID” tab is further divided into three tabs. The "Operator" or "Service" tab can be
cleared as needed. The "Total" log cannot be cleared.
Fig.3.1 Feeder ID log
screen
3.1.1 Display items
The display items of feeder ID log screen are as follows.
When feeder is attached or machine is turned on, the last saved data is displayed. If the
last saved data does not exist, the initial value is displayed.
Table3.1 Display items of feeder ID log screen
Column name Contents
Feeder SetNo Set position number of attached feeder is displayed.
Feeder ID Feeder ID is displayed.
Feeder Type Feeder type specified by parts data is displayed.
In the case of the feeder unused by board data, the last feeder
type is displayed.
Parts Name Parts name attached to the feeder is displayed.
In the case of the parts unused by board data, the last parts name
is displayed.
Feeder Counter Number of times of feeder drive (number of shots) is displayed.
This count is used as the standard when calculating various error
ratios.
Pick Error Counter Number of pick error of the parts on the feeder is displayed.
Pick Error % Ratio of “Pick Error Counter” / “Feeder Counter” is displayed.