INVENTUS_Tester_230726_DS_CC_E.pdf - 第2页
www.asys-gr oup.com Änderungen vorbehalten. Alle aufgeführten Informationen sind allgemeine Beschrei- bungen und Leistungsmerkmale, die im konkreten Anwen- dungsfall nicht immer in dargestellter Form zutreen bzw . die s…
INVENTUS Series – Final Assembly & more…
Automatic Inline Test Handler
INVENTUS ATH 01
Options
_ Electrical width adjustment
_ Automatic width adjustment
_ Pneumatic clamping of test adapters
_ SMEMA height
_ Flexible Pin Block System for a reliable signal transfer
_ Good/bad sorting
_ Machine networking via IC Net
_ Inlet conveyor
_ Scannerbracket with manual x-y-axle
Description
The ASYS inline test handler is designed for single- or double-
sided In-Circuit or function tests. The system is equipped with
a one-segment conveyor which stops the PCB at a defined
position. During the sandwich-like contacting procedure the
PCB is aligned by centering pins while the spring-mounted
conveyor segment is pushed down. After a response from the
tester the contacts open again and the PCB is handed over
to the downstream machine. It is possible to work either with
one-sided contacting and a support plate or with double-
sided contacting.
Features
_ Servo driven contacting station with highest accuracy
_ Controlled by PLC
_ Digital interface to electrical test system
_ Cassette drawer mechanism for pin adapters
on top and / or bottom
_ Pass through mode
_ 4 HE slot for Test PC
INVENTUS_ATH01_Tester_230726_CC_E
www.asys-group.com
Änderungen vorbehalten.
Alle aufgeführten Informationen sind allgemeine Beschrei-
bungen und Leistungsmerkmale, die im konkreten Anwen-
dungsfall nicht immer in dargestellter Form zutreen bzw. die
sich durch Weiterentwicklung der Produkte ändern können.
Verbindlich sind lediglich die im Vertrag vereinbarten Leistungs-
beschreibungen.
Printed in Germany
ASYS Automatisierungs-
systeme GmbH
Benzstraße 10,
89160 Dornstadt, Germany
Tel (+49) 7348 9855 0
Fax (+49) 7348 9855 91
info@asys.de
ASYS Group Americas Inc.
140 Satellite Boulevard NE
Suite B1, Suwanee
GA 30024 USA
Tel (+1) 770 246 9706
Fax (+1) 770 246 9866
info@asys-group.com
ASYS Group Asia Pte. Ltd.
30 Shaw Road #01-02/03
Singapore 367957
Tel (+65) 6280 8887
Fax (+65) 6858 5005
sales@asysgroup-asia.com
ASYS Group China Co., Ltd.
Room 1707, Tower 1
Kerry Everbright City
218 Tian Mu Xi Road
Shanghai 200070, P.R. China
Tel (+1) 770 246 9706
Fax (+1) 770 246 9866
info@asys-group.com
INVENTUS ATH 01
Machine configuration
Transport height
Max. transport width
Interface
Transfer direction
Operating side
Fixed rail
920 mm ± 50 mm
460 mm
Siemens, SMEMA, SMPI, Panasonic, Fuji, Sanyo
From left to right
Front of the machine
Front of the machine
Panel dimensions
Panel length
Panel width
Panel thickness
Panel weight max.
Component clearance
Edge support width
50 to 460 mm
50 to 460 mm
0.8 to 4.5 mm
to 3 kg
± 40 mm
3 mm
Installation requirements
Power supply
Power supply system
Power consumption
Air supply
Air consumption
230 V, 115V 50 / 60 Hz, ± 10%
L1 + N + PE
1,0 kW
6 bar
5 Nl/min
Machine description
Length x Width x Height
Cycle time incl. contacting
Contact force
Weight
Noise level
1000 x 1470 x 1580 mm
< 9 sec plus test time
up to 5000 N (higher contact force on request)
800 kg
< 75 dB
1580
1952
TH
950
630
FA 350
215
77
1470
1000