ET8383-說明書(英文).pdf - 第40页

36 ② Push t he block for a round trip so tha t all the beads can b e lubricated. ③ Repeat ① & ② , inspect w hether gr ease adhere t o the end of track. 5.2.8 Maintenance of ball screw 1.I nject grease with grease gun…

com

pleted with the help of relevant personnel.

Monthly maintenance should include weekly maintenance items. Some items of heavy workload can be

completed with the help of relevant personnel and technicians.

After half a year or one years running, all the motion parts must have been worn, and the capabilities of other

motionless parts will change too. So they need adjustment, maintenance, and replacement. The jobs need to be

completed by professionals at professional stations or repair shops according to the advice from facility

management technicians.

1.Take off the cover of X-axis, clean the screw and track, check the screw if loose or not, spread lubricant on the

screw and track, move the X-axis for spread more lubricant. Then take on the cover.

2.Take off the cover of Y-axis, clean the screw and track, check the screw if loose or not, spread lubricant on the

screw and track, move the Y-axis for spread more lubricant. Check the screw of light sensor. Then take on the

cover.

3.Take off the cover of Z-axis, clean the screw and track, check the screw if loose or not, spread lubricant on the

screw and track, move the Z-axis for spread more lubricant. Check the screw of light sensor. Then take on the

cover.

4.Belt: check if the belt is loosened. Adjust the belt if it loosened: firstly, disassemble the fixed screw. Secondly,

pull the motor back. Then press the belt 10N stress at the mid of the belt, bend 10~15mm. Finally fixed the

screws.

5.Check the linear rail straightness and accuracy. Adjust it if it is abnormal.

6.Replace the worn component.

5.2.6 Oil-water separator maintenance

1. Sug

gested working pressure is lower than 0.7Mpa.

2. Drai

n regularly to keep the valve clean and dry.

5.2.7 Maintenance of linear track

1.L

ubricate the linear track every 100km wal

king.

2.Do n

ot lubricate too much grease.

3.Inject the grease into the block. Do not straightly smear the grease on the surface of block

4.Prevent impurities getting into the inside from conjunction.

5.How to inject the grease:

① Stop the unit. Inject into the nozzle 0.7cc grease.

② Push t

he block for a round trip so that all the beads can be lubricated.

③ Repeat ①&②, inspect whether grease adhere to the end of track.

5.2.8 Maintenance of ball screw

1.I

nject grease with grease gun by many times. Roll the screw spindle half-turn after injecting one time. Do not

inject rated grease, otherwise, it will not be lubricated completely.

2.Finished lubricating rated grease, Push the block for a round trip to spread grease.

5.2.9 Cleaning

● Hy

drocarbons dissociate causing an explosion if contacting aluminum(Zn) and chrome-plate. In this machine,

aluminum (Zn) and chrome-plate surface are used.

● Only use solvents or cleaning agent without hydrocarbons! Before you use a solvent or cleaning agent, check

its ingredients!

QUICK INTELLIGENT EQUIPMENT CO., LTD.

ADD: NO.11, FengXiang Road, Wujin High-Tech Industrial Development Zone, Jiangsu,

China

TEL: 86-519-86225678

FAX: 86-519-86558599

POSTCODE: 213167

WEBSITE: www.quick-global.com