Nordson_SuccessStory_505_Packaging.pdf - 第2页
www .nordson.c om/T es tInspect | +1 760.918.8471 Copyright © Nordson Corpor ation. All rights reserved. For more inf ormation, speak with your Nordson represent ative or cont act your Nordson regional oic e Nordson T e…
Success Story – Packaging
Application Story
Type of Customer
A leading international mass production packaging company.
Our Customer’s Requirements
The company was in need of a high-speed, high-volume
solution that eectively would increase inspection accuracy,
improve traceability, and identify and categorize defects on
boards and small components for mobile phone, tablet, and
dense board applications.
The ability to inspect 20k components – including very
shiny ones - in 20 seconds was needed to ensure production
requirements. Additionally, inspection sensitivity needed to be
high enough to verify placement of 0201 metric components,
which could not be done manually.
Our Solution –
The Nordson SQ3000™ AOI System
By automating inspection, operator time and costs could
be reduced, and production volumes could be increased
with signicantly fewer defective parts escaping detection.
A 0201 inspection capability would deliver repeatability
of 6 micrometer in 3 sigma, for X, Y and Z measurement.
With comprehensive 2D and 3D inspection, text, rotation,
position, cracked and damaged components, debris, gap
measurement between components, and missing components
would be detected, while 3D coplanarity inspection would
ensure that all components were properly seated. Defects
can be automatically categorized, enabling fast and accurate
traceability. Our Multiple Reection Suppression (MRS)
technology eectively mitigates measurement inaccuracies.
The Nordson SQ3000 can be integrated as part of full line
automation with existing Manufacturing execution systems (MES).
With minimal operator intervention, and a user-friendly interface,
training time would be reduced, and operator time used more
eiciently, providing a cost-eective competitive edge.
The stability of the SQ3000 means that there is low mean time
between failures, oen more than 35,000 hours.
Each of these factors contributes to reduced costs within the
nancial justication, while lower escape rates contribute to
customer satisfaction, and a best in class solution.
www.nordson.com/TestInspect | +1 760.918.8471
Copyright © Nordson Corporation. All rights reserved.
For more information,
speak with your Nordson
representative or contact
your Nordson regional oice
Nordson Test & Inspection
Europe, SEA, Africa
ti-sales-eu@nordson.com
Nordson Test & Inspection
Americas
ti-sales-us@nordson.com
Nordson Test & Inspection
China
ti-sales-cn@nordson.com
Nordson Test & Inspection
Japan
ti-sales-jp@nordson.com
Nordson Test & Inspection
Singapore
ti-sales-eu@nordson.com
Nordson Test & Inspection
Taiwan
ti-sales-tw@nordson.com
Nordson Test & Inspection
Korea
ti-sales-korea@nordson.com
Success Story – Packaging Application Story
The Result
Each of the customer’s objectives were met. On the production side, inspection was automated;
the challenge of inspecting 20k components in 20 seconds was realized; production speeds
were increased, and the number of escapes driven down. Defect categorization and accelerated
traceability led to catching defects earlier in the process, thereby enabling them to be eliminated
at their source, and more quickly than previously possible. With the cost, time and waste
savings, all these improvements, made possible with the Nordson SQ3000, added value and
enhanced customer relationships.
For more information on Nordson Test and Inspection products, services, or solutions,
visit our website at www.nordson.com/TestInspect