00190702-04.pdf - 第15页
Retrofitt ing Inst ructions Retrofitt ing Inst ructions Bulk-Case Feeders Edition 05/99 Page 15 of 23 Retrofitting Instructions Bulk-Case Feeders for Siplace 1 General These retrof itting instr uct ions des cribe h ow to…
Retrofitting Instructions Bulk-Case Feeders Retrofitting Instructions
Edition 05/99
Page 14 of 23
Retrofitting Instructions Retrofitting Instructions Bulk-Case Feeders
Edition 05/99
Page 15 of 23
Retrofitting Instructions Bulk-Case Feeders for Siplace
1 General
These retrofitting instructions describe how to install the compressed-air distributor on the component
change-over table and change-over trolley, retrofit the bulk-case air supply on the component change-over
table or change-over trolley, and install the F3 protection conversion kit (bulk-case feeders). The retrofitting
instructions are valid for SIPLACE 80 F3 placement machines as of machine number 51.
1.1 Required Tools, Testing Equipment and Documentation for Retrofitting
−
Standard tools
−
Retrofitting Instructions Bulk-Case Feeders Item no.:00190702-04
−
Adjustment gage 1 for compressed-air distributor Item no.:00322317-01
−
Adjustment gage 2 for compressed-air distributor Item no.:00322328-01
1.2 Prerequisites
−
Line computer software as of version 401.002
Required versions Hardware
Line computer PC/486 66 MHz
Operating system >=SCO ODT 3.0
−
Station computer software as of version 8.006
Required versions: MVS >=2106
M10000 >=1299
Axes >=3.6
CRDL >=B8 (2.1 / 10.08.93)
Coplanarity Provisionally: COV 201.012 ff
Sitest >= 202.XXX
Component table SW As of version 2.5
Retrofitting Instructions Bulk-Case Feeders Retrofitting Instructions
Edition 04/96
Page 16 of 23
1.3 Retrofit Kits
1.3.1 BC Compressed-Air Supply (Change-Over Table) Item No. 00142331-01
A BC compressed-air supply for the change-over table is required on the SIPLACE 80 S/F for each
component change-over table.
The retrofit kit contains the installed compressed-air distributor (long), three fixing screws and the bulk-case
air supply (change-over table) retrofit kit.
1.3.2 Bulk-Case Compressed-Air Supply (Short) Item No. 00142332-01
A bulk-case compressed-air supply (short) is required on the SIPLACE 80F for each component change-over
table with WPC.
The retrofit kit contains the installed compressed-air distributor (short), three fixing screws and the bulk-case
air supply (change-over table) retrofit kit.
1.3.3 Retrofit Kit, Bulk-Case Air Supply (Change-Over Table) Item No. 00346318-01
This retrofit kit ensures reliable compressed-air supply. One kit is required on the SIPLACE 80 S/F for each
component change-over table where there is an existing compressed-air distributor (short or long).
The retrofit kit contains the installed controller and cable mount and a ring for installation in the pneumatic
unit.
1.3.4 BC Air Supply (Moving Change-Over Table) Item No. 00142330-01
A BC air supply (moving change-over table) is required on the SIPLACE 80 S/F for each component change-
over trolley.
The retrofit kit contains the installed compressed-air distributor (long), three fixing screws and the bulk-case
air supply (change-over trolley) retrofit kit.
1.3.5 Retrofit Kit, Bulk-Case Air Supply (Change-Over Trolley) Item No. 00346319-01
This retrofit kit ensures a reliable compressed-air supply. A kit is required on the SIPLACE 80 S/F for each
component change-over trolley where there is a compressed-air distributor.
The retrofit kit contains the installed controller and cable mount and a ring for installation in the pneumatic
unit.
1.3.6 F3 Protection Conversion Kit (Bulk-Case Feeders) Item No. 00325075-01
This conversion kit is required on the SIPLACE 80F3 for each machine. Conversion is necessary so that the
bulk-case feeder does not have to be removed when the doors are opened.
The conversion kit contains 2 complete hinged doors, 2 installation strips and fixing screws.