JM-Series_E.pdf - 第2页

JM-20 Best in class speed. Significant speed increase over previous generation. Component insertion time down to 0.6 seconds for vacuum nozzle and 0.8 seconds for gripper nozzle. Best in class speed. FEATURE 4: New &quot…

Advanced MI solution

50×50㎜∼410×360㎜

Machine dimension (W×D×H）*⁶

Mass (approximately)

JM-100

1,300kg

Max. 4kg

Max. 30㎜

0603∼□50㎜

□3㎜∼78×48㎜ or 85×25㎜

1,500×1,500×1,450㎜

±0.05㎜ (3σ)

82L / min

900㎜ ±20㎜

●

0.6 sec / part *¹*⁴*⁵

0.8 sec / part *²*⁴*⁵

56 18 14 14 10 10

±0.04㎜

2.2kVA

Standard

0.5±0.05MPa

●

Custom

●

Using following conditions (Applicable part: Aluminum electrolytic capacitor (φ 8 mm), Feeder: two MRF-S, Placement conditions: Simultaneous pick, sequential insertions using 2 nozzles)

Using following conditions (Applicable part: Connector (4 pin), Insertion conditions: 2 sequential picks and insertions using 2 nozzles)

*3 Using following conditions (Applicable parts aluminum electrolytic capacitor (φ8 mm) When the component height is 28 mm, board transport and BOC mark recognition time are not included.)

Board transport and fiducial recognition not included

For 16mm head height.

For 900mm conveyor.

*7 Using 54mm FOV camera *8 Using 27mm FOV camera

Tray*²*³

80×100㎜∼410×360㎜

50×50㎜∼800×360㎜

80×100㎜∼800×360㎜

When using/not using the clinch unit

●

JM-20

1,500×1,657×1,550㎜ 1,500×1,892×1,550㎜

1,760kg 1,985kg

L size PCB XL size PCB

410×360㎜ 410×560㎜

800×360㎜ 800×560㎜

Max. 55㎜

50L / min

2.0kVA

□3㎜∼□50 *⁷,1005∼□24㎜ *⁸

0.8 sec / part *³

Standard

L size PCB

Custom

●

Custom

●

Standard

●

XL size PCB

80 26 20 22 16 16

8 2 1

JM-100

JM-20

JM-100 JM-20

Feeder capacity*¹

Multi Task Platform

1.3 sec / part *²*⁴*⁵

Specification

Option

Tape feeder

in case of

8mm tape

Radial feeder Axial feeder

Stacked

stick feeder

Tray Holder

(full)

MTS

MAF-LMAF-SMRF-LMRF-S

Max applicable number of same feeders (Front & Rear total).

*2 Please contact our sales person for tray specification detail.

Rear side only

Check nozzle base*

Automatic board width adjustment

Rear side operation unit

Conveyor extension 250mm

Conveyor height 950mm

3D-VCS

Lead correction jig

Spare trolley

Main line filter

JaNets / IFS-NX

Keyboard

Conveyor cover

OuterRing lights

Super foot

Feeder float sensor

（

for SMT

）

Drive cylinders

Management data output

Traceability multi-code reader

Standard specification

( L size PCB)

Clinch specification

( L size PCB)

Standard specification

(L size PCB)

Clinch specification (L size PCB)

Board size

Single clumping

Double clumping

Component size

Component height

Laser recognition

Vision recognition

Laser recognition

Vision recognition

PCB weight

Insertion speed

(Insertion components）

Vacuum nozzle

Gripper nozzle

Placement accuracy

(SMT）

Power supply

Apparent power

Circuit breaker

Operation air pressure

Air consumption (standard）

Conveyor height

200 to 415V AC 3-phase

*Custom based on component

*Optimum

www.juki.co.jp

JUKI SMT ASIA CO.,LTD.

JUKI INDIA PVT. LTD.

www.smtjukiindia.com

JUKI AUTOMATION SYSTEMS INC.

www.jukiamericas.com

JUKI AUTOMATION SYSTEMS GMBH.

www.juki-smt.com

Sep- 2020/Rev.01

TOKYO JUKI INTERNATIONAL

TRADING (SHANGHAI) CO.,LTD.

www.jukichina.com

*Please refer to the product speciﬁcations for details.

■JUKI Speciﬁcations and appearance may be changed without notice.

General purpose

bulk feeder

MVF



JM-20

Best in class speed. Significant speed increase over previous

generation. Component insertion time down to 0.6 seconds for

vacuum nozzle and 0.8 seconds for gripper nozzle.

Best in class speed.

FEATURE 4: New "Takumi head" with multiple recognition heights

JUKI'S proprietary 3D Vision Centering System (3D-VCS) is used for cetering larger or more

complicated lead patterns. 3D-VCS can recognize a variety of lead tip shapes including round,

square, and semi-circular. It can also detect difference in lead length for accurate insertions.

The JM-20 supports larger

nozzles and larger, odd shape

components such as DIMM

and PCI connectors and large

capacitors or transformers.

■

Laser centering

High speed insertion Large Boards/

Odd Shape Components

FEATURE 1: Laser sensor for lead detection

FEATURE 2: Fast insertion

JM-100

FEATURE 3: Large and Odd-Shape Components

■

Vision centering

PCI DIMM Large connector Check nozzle

大型コネクタ

Side Top

0.8 sec0.6 sec

per part for

vacuum nozzles

per part for

gripper nozzles

3D-VCS Image

PCB

Head height

positions

30㎜

16㎜

25㎜

20㎜

ex: Head position for

25mm tall parts

ex: Head position for

16mm tall parts

The new "Takumi head" has 8 nozzles and is equiped with a height adjusting laser to optimize speed.

This head can handle a wide range of components while maintianing the maximum speed.

■

Variable height laser sensor changes

automatically based on component height

The laser sensor changes height automatically based on the the

component height to minize the movement and optimize speed.

Height can change randomly between 4 different settings.

■

Improved productivity with 8 nozzles

■

Wide component range from small to large

and heavy

JM-100 and JM-20 can handle components from metric 0603 up

to 50mm square with a weight of up to 200g. Maximum insertion

force of up to 50N.

The JM-100 uses 8 nozzles vs. the previous generation's 6

nozzles. This increases the number of parts that can be picked

on each cycle and reduces overall cycle time.

CCD detector

Optical source

Nozzle center

Component

ecognition

Recognition

result(body)

Recognition

result(lead)

Recognition

image

Component

image

Components are rotated 360 degrees in the laser. The entire outline of the component is measured accurately

by a high resolution CCD sensor. The exact component position and angle are obtained in a fraction of a second

without a side trip to a camera.After measuring the component body, the lead tips are measured to ensure

accurate insertion.

Component feeders are available for a broad range of tape components, stick components, discrete components, and tray

components. Custom feeders are also available.

Radial Feeder

MRF-S/MRF-L /SNAP IN

Axial Feeder

MAF-S

Tape feeder

(SMT)CTFR

Stacked stick feeder

General Purpose Bulk Feeder

Tray Holder

Taped parts Tray

Intelligent feeders are supported to provide setup verification

and also component traceability.

Feeders can be equipped with barcodes or RFID tags to verify

the correct part number is loaded in the correct location. PCB

barcodes are scanned at the start of production and all

component data is recorded for traceability.

Matrix tray server

TR5SNK

New active clinch unit supports bend in, bend out,

and N bend to prevent components from lifiting

during reflow and make handling prior to reflow

easier.

Bluk feeders typically are

custom made for one

particular part and require

a lot of space. Our new

Flexible Bulk Feeder is

dramatically smaller than

bowl feeders and can

handle a range of part

types. It mounts on our

standard feeder bank and

can be installed and

removed quickly and easily.

Clinch unit

FEATURE 7 : Component feeders (option)

FEATURE 6 : Active clinching

FEATURE 5 : Setup verification and traceability (option)

CAN

*For clinch specifications

Stick parts

General Purpose Bulk Feeder MVF

NEW