XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第2页

R SYS-XP142-2.0E R XP-142E System Reference

Manual Update Notice

The following manual has been revised and re-released:

Manual title: XP-142E System Reference

Manual number (updated edition): SYS-XP142-2.0E

Manual number (previous edition): SYS-XP142-1.0E

Date of issue: January 30, 2004

The layout of this manual has been improved to make it easier to use.

Safety Guidelines

Part 1 General

Part 2 Operation

Part 3 On-Machine Programming

Part 4 Creating Templates at the Machine (Vision Type 18)

Part 5 Commands

Part 6 Proper Data

Part 7 I/O Map

Part 8 Errors and Countermeasures

Note:

For a hard copy of the manual, contact your nearest Fuji sales representative or

send an e-mail request to the address below.

E-mail : intnetqst@fuji.co.jp

SYS-XP142-2.0E

XP-142E

System Reference

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.

(ESR0002c)