JO-103-002_w.pdf - 第42页

2-5 AL VEG-ID 1.1.3 Procedure for Detachment of Fixtures Procedure (1) Detach the xtures for both Y and X axes. Fixture for Y Axis Fixture for X Axis Screw (M4) Screw (M3) Screw (M3) Fig. B7 (2) Fix the clamp plate (acc…

2-4

ALVEG-ID

(4) Fasten the cables with tie wraps.

Adjust the tie wraps to the location of the tie mounts and x them on

the tie mounts after tightening the cable ties.

Tie Mount

Bundle

Fig. B5

The cameral cable should also be bundled and xed on the tie mounts

using the tie wraps.

Camera Cable

Fig. B6

0809-002

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

2-5

ALVEG-ID

1.1.3 Procedure for Detachment of Fixtures

Procedure

(1) Detach the xtures for both Y and X axes.

Fixture for Y Axis

Fixture for X Axis

Screw (M4)

Screw (M3)

Fig. B7

(2) Fix the clamp plate (accessory) with the screws (M3) that were used to

fasten the xtures and tighten the clamp screw for rm attachment.

X Axis

Y Axis

Clamp Screw

Clamp Plate

Screw (M3)

Fig. B8

0809-002

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures

2-6

ALVEG-ID

(3) Detach the camera end protection cap located inside the LED lighting

unit.

Protection Cap

Fig. B9

No image can be captured with the protection cap attached.

0809-002

1.1 Procedures for Attachment of Camera Unit and Detachment of Fixtures