Classic 1008 规格说明书202308.pdf - 第3页
温 度 Temperatur e -20℃ ~ +45℃ 湿 度 Humidity 相对湿度30% - 70% 30% - 70% Relative humidity (non condensing)
软件智能备份模块 Software
intelligent backup module
数据库自动备份，软件升级后不丢失
Database automatic backup, software upgrade is not lost
保养预警功能 Maintenance
early warning function
机台丝杆，滑块，电机等自动提示保养讯息
Machine wire rod, slide block, motor and other automatic maintenance message
印刷参数智能模块 printing
parameter intelligent module
选择生产基板类型，自动给出最优的参数设置
Customer select the type of production,like FPC,LED,Phone PCB... the printer can
give the parameter automatically.
标准配置 Standard
Configuration
规 格 Specification
操作系统 Operation System Win7,可选Windows XP，Win10
刮刀 Squeegee 直连丝杆/单点悬浮式刮刀 Direct screw/single-point suspension squeegee
刮刀压力恒定智能控制系统
Constant intelligent control
system of squeegee pressure
软件设置调整刮刀压力
Pressure adjusted by software control
钢网自动定位模块 Automatic
positioning module of stencil
钢网放入钢网支撑架中，刮刀头自动实现钢板定位
Put the stencil into the support frame,the squeegee automatically realizes the
positioning of the stencil
基板支撑定位系统PCB
Support positioning system
支撑等高块，支撑pin，支撑平台 Support block, support pin, support platform
网板定位 Stencil Alignment 程序设定，Y向定位 Program control, Y direction orientated
设备接口 Machine Interface
SEMI Input/Output 4芯 国际标准接口
SEMI Input/Output 4 core international standard interface
通讯接口 Connectivity
RJ-45LAN(网络)和USB2接口可用
RJ-45LAN(networking) and USB2 interface available
快捷式平台调整系统
Fast platform adjustment
system
旋钮式手动快速调整平台高度
Knob type manual rapid adjustment platform height
智能传输系统 Intelligent
transmission system
自动停板装置+自动基板定位+左进左出，左进右出，右进右出，右进左出
The automatic limit device + automatic positioning substrate + left into the left,
the left into the right, right into the right, right into the left out
基板固定 Substrate Fixture
柔性侧夹,手动可伸缩压板装置
Flexible side clamp, Z to the wafer clamp device
清洗结构
湿洗+干洗+真空自由组合
设备尺寸 Approximate
Dimensions
1140（长）X1385（宽）X1510（高）mm 1140（L）X1385（W）X1510（H）mm
设备重量 Approximate Weight
960kg含包装(设备本身+配置选项)
960kg boxed (dependent upon configured options selected with machine)
860kg不含包装(设备本身+配置选项)
860kg unboxed (dependent upon configured options selected with machine)
电气配置及环境要求 Electrical
configuration &
Environmental requirements
规 格 Specification
电 压 Voltage
电压：220V，±10%，单相50/60Hz。
220Volts +/- 10%.Single phase 50/60Hz
功 率 Power 2.5kw
气 源 Air Supply 4.5-6kgf/cm²
温 度 Temperature -20℃ ~ +45℃
湿 度 Humidity 相对湿度30% - 70% 30% - 70% Relative humidity (non condensing)
DESEN Classic 1008规格说明书
DESEN Classic 1008 SPECIFICATIONS
规 格 Specification
±22μm@6σ, Cpk≥2.0
±10μm@6σ, Cpk≥2.0
7s
470mm x 370mm~737mm x 737mm
20mm - 40mm
50mm (X) x 50mm (Y)
400mm (X) x340mm (Y)
0.4mm - 6mm
0kg - 10kg
1 - 200mm/s
0mm - 20mm
脱模速度:0.1 - 20mm/s Speed:0.1- 20mm/sec
脱模距离:0mm - 20mm Distance:0mm - 20mm
锡膏，油墨，银浆 Solder paste，Printing ink, Silver paste
规 格 Specification
程式自动轨道调宽 Programmable motorized rear rail
L→R,L→L，R→L，R→R
≤4kg
柔性侧夹,手动可伸缩压板装置
Flexible side clamp, Z to the wafer clamp device
≤18mm（超出可定制）
900±40mm
规 格 Specification
Mark点软件测量，二次定位，组件识别功能，数字相机:130万像素，FOV:10*8mm
Fiducial Mark software measurement,twice position,device identification
function,Digital camera: 1.3 million pixels, FOV:10*8mm
2个或4个mark基准点定位系统
Two or four fiducial marks alignment system
方形， 圆形， 三角形， 十字形，用户自定义类型
Square， Round， Triangle， Cross，Customized types
0.3mm ~ 3mm
自动光学调整 Auto lighting adjustment
基准点自动搜寻 Auto fiducial search
规 格 Specification