Smart Feeder 16 mm E - Removing and Fitting the Tape Disposal Flap.pdf - 第4页

E-by SIPLACE Smart Feeder 16 mm E Removing the Tape Disposal Flap Part Exchange 1/2 CAUTION! Refer to safety inst ructions in user manual before working on the machine. ESD guidelines are to be followed Tool: T1 Wear Par…

E-by SIPLACE Smart Feeder 16 mm E Tape Disposal Flap

Part Exchange

T1 – Allen key size 3, 0.6 Nm

E-by SIPLACE Smart Feeder

16 mm E

Removing the Tape Disposal Flap

Part Exchange

1/2

CAUTION! Refer to safety instructions in user manual before working on the machine.

ESD guidelines are to be followed

Tool:

Wear Part: Consumables:

1. Remove the screwed axle on the flap with

T1.

2. Pull the flap sideways out from the feeder.

E-by SIPLACE Smart Feeder

16 mm E

Fitting the Tape Disposal Flap

Part Exchange

2/2

CAUTION! Refer to safety instructions in user manual before working on the machine.

ESD guidelines are to be followed

Tool:

Part No.: 03091584-SXX

1. Fit in the Tape Disposal Flap 2. Tighten the screw with T1.