Printer 710_810 v8 Transport Rails Module.pdf - 第2页
TRAN SPORT R AILS MOD ULE OVERVIEW 16.2 Technical Reference Manual Chapter Issue 6 Oct 06 The transp ort rai ls are a pr ogrammable wid th convey or system, set by t he board product fi le, which transport s th e board u…
TRANSPORT RAILS MODULE
OVERVIEW
Chapter Issue 6 Oct 06 Technical Reference Manual 16.1
CHAPTER 16 TRANSPORT RAILS MODULE
OVERVIEW
Item Description Item Description
1 Transport Belt (2 positions) 10 Board at Left Sensor
2 Fixed Front Rail 11 Rail Lifted Left Vane
3 Board at Right Sensor 12 Rail Lifted Left Sensor
4 Front Transport Belt Drive Motor 13 Moving Rear Rail
5 Rail Stop Bar (Clatter Bar - 2 positions) 14 Moving Rail Stepper Motor
6 Rail Lifted Right Sensor 15 Board Clamp (2 positions)
7 Rail Lifted Right Vane 16 Moving Rail Drive Shaft (2 positions)
8 Moving Rail Home Vane 17 Rear Transport Belt Drive Motor
9 Moving Rail Home Sensor
Heavy Board Rails
(optional)
1
17
2
3
13
14
15
16
11
12
4
5
10
6
7
9
8
TRANSPORT RAILS MODULE
OVERVIEW
16.2 Technical Reference Manual Chapter Issue 6 Oct 06
The transport rails are a programmable width conveyor system, set by the board
product file, which transports the board using belts from the upline machine, into
this machine, where the board is positioned, clamped and printed. After printing
the board is transferred using the same belts to the downline machine.
The heavy board transport rails can transport boards up to 6kg. This is achieved
using an extra drive pulley on each rail and flat profiled transport belts.
CAUTION
CAMERA BOARD STOP.
To prevent damage to the camera board stop the
remote board stop must be used for product boards over 1kg in weight.
NOTE
Information on the remote board stop is detailed in the Rising Table chapter of
this manual.
The transport rails can be fitted with one of the following board clamping
arrangements:
• 250mm Board Clamps
• 500mm Board Clamps
• Board Snugger Assembly
• Foil-less Clamps
Board snuggers are an alternative to the standard board clamps and are utilized
when there is a requirement to print close to the board edge.
Foil-less clamps are utilized for thin pliable boards where there is a requirement
to print close to the board edge. The foil-less clamps are assisted with the use
of a vacuum box beneath the product board.
TRANSPORT RAILS MODULE
OVERVIEW
Chapter Issue 6 Oct 06 Technical Reference Manual 16.3
Figure 16-1 Board Clamping Arrangements
Board
Transport Belts
Rear Snugger Plate
Counterweight Block
Board
Transport Belts
Rear Foil-less Clamp
Foil-less Clamps
Board
Transport Belts
Rear Board Clamp
Board Clamps
Board Snuggers