Machine Overview.pdf
MACHINE OVERVIEW OVERVIEW Chapter Issue 4 Nov 09 Technical Reference Manu al 4.1 CHAPTER 4 MA CHINE OVERVIEW OVERVIEW There are two machine cover designs as follows: • Sliding Glass Cover Machine (two variant s: SGC and …
MACHINE OVERVIEW
OVERVIEW
Chapter Issue 4 Nov 09 Technical Reference Manual 4.1
CHAPTER 4 MACHINE OVERVIEW
OVERVIEW
There are two machine cover designs as follows:
• Sliding Glass Cover Machine (two variants: SGC and SGC iX)
•Metal Cover Machine
Figure 4-1 Sliding Glass Cover
Item Description Item Description
1 Opening Printhead Cover 5 Rear Panel
2 Mains Isolator Switch 6 Right Hand Safety Cover
3 Front Panel 7 Emergency Stop Button (E
Stop)
4 TCM Manifold 8 Left Hand Safety Cover
1
8
View on Front - Left Quarter
4
3
2
5
6
7
View on Rear - Right Quarter
MACHINE OVERVIEW
OVERVIEW
4.2 Technical Reference Manual Chapter Issue 4 Nov 09
Figure 4-2 Sliding Glass Panel iX Covers
Item Description Item Description
1 Right-hand Control Buttons 5 Programmable Beacon
2 ESD Connection Point 6 Emergency Stop Button (E
Stop)
3 Mains Isolator Switch 7 Left Hand Control Buttons
4 Rear Printhead ‘Knock-out’
Panel. Environmental
Control Connection Point
2
4
3
1
6
7
View on Front - Left Quarter
View on Rear - Right Quarter
5
MACHINE OVERVIEW
OVERVIEW
Chapter Issue 4 Nov 09 Technical Reference Manual 4.3
Figure 4-3 Metal Covers
This chapter describes the function and the purpose of each of the machine
modules and the relationship and interaction between modules, if applicable.
For detailed information regarding each module refer to the relevant module
chapter in this manual.
Item Description Item Description
1 Front Printhead Cover 5 Rear Panel
2 Mains Isolator Switch 6 Right Hand Safety Cover
3 Front Panel 7 Emergency Stop Button (E Stop)
4 Rear Printhead Fixed Cover 8 Left Hand Safety Cover
View on Front - Left Quarter
7
View on Rear - Right Quarter
2
3
8
1
6
5
4