00193364-04.pdf - 第23页
Splice Detection Table Controller 2 A ssembly instructi ons Splice Detection Table Controller SIPLACE HS-50 09/2008 Edition 23 : Fix the cable for the t able controller like shown below (upper pictur e). 2 The cable for …
2 Assembly instructions Splice Detection Table Controller SIPLACE HS-50 Splice Detection Table Controller
09/2008 Edition
22
: Bind the cable with a cable to the power supply cable.
2
Avoid clamping the cable loop at lowered component table between guide pillar and guide bush.2
2
2
2
2
2
2
2
2
2
2
2
2
Bind the cables
don’t clamp the
cable loop
Splice Detection Table Controller 2 Assembly instructions Splice Detection Table Controller SIPLACE HS-50
09/2008 Edition
23
: Fix the cable for the table controller like shown below (upper picture).
2
The cable for the table controller splice detection must be fixed in a way that it doesn’t hook under
the plate edge (by lifting the table it could be too short and break at the table controller). 2
2
2
: Put the changeover table back into the machine.
: Connect the splice detection cable to the machine.
Cable tie
Here the cable to the table
controller can get stuck at
the fixation of the hose and
the connection can break at
the RJ45 connector by lifting
the table.
Possibility to thread
2 Assembly instructions Splice Detection Table Controller SIPLACE HS-50 Splice Detection Table Controller
09/2008 Edition
24