Printer 710-810 v9 Introduction.pdf - 第2页
INTRODUCTION DOCUMENTATION 1.2 Technical Reference Manual C hapter Issue 1 1, Jul 16 Electronic DVD The following information is provided on DVD: • Installa tion Manual • T echn ical Reference Manual • Operator Manual (i…
INTRODUCTION
DOCUMENTATION
Chapter Issue 11, Jul 16 Technical Reference Manual 1.1
CHAPTER 1 INTRODUCTION
DOCUMENTATION
Description DEK screen printing machines are fully supported by a comprehensive range
of technical documentation, both electronically and in hard copy. The electronic
documentation is supplied on CD-ROMs and the machine PC hard disk.
The information contained within the documentation enables a ASM service
engineer or ASM trained technician to install, calibrate, service and fault find
DEK printing machines safely and efficiently. A user-friendly operating guide
allows ASM trained operatives to utilize the machine functions.
The documentation supplied with the machine is disseminated into the following
structures:
Machine Models The above documentation structures support following machine models:
• Horizon
• Galaxy
•Gemini
• Europa
• NeoHorizon
•E By DEK
Technical Reference Manual Provides detailed information on the machines
modules, sub assemblies and calibrations.
Maintenance Manual Provides detailed information on the machine
monthly maintenance schedule.
Installation Manual Enabling ASM authorized personnel to install the
machine to a customer site. Detailing machine
preparation, installation instructions, alignment
procedures and machine performance check.
Operator Manual Machine user guide allowing a ASM trained oper-
ative to employ the machine functions.
Electrical Drawings Contains electrical circuit diagrams for fault diag-
nosis.
Machine Tutorials Animations available from the help menu to assist
the operator in machine functions such as: safety,
navigation, machine preparation, product
changeover and setup product.
Consumable Replenishments Animations available from the help menu to assist
the operator in replenishing the consumables for:
under screen cleaners, paste dispenser and Pro-
Flow.
INTRODUCTION
DOCUMENTATION
1.2 Technical Reference Manual Chapter Issue 11, Jul 16
Electronic
DVD The following information is provided on DVD:
• Installation Manual
• Technical Reference Manual
• Operator Manual (in all available languages)
• Electrical Drawings
• Machine Tutorials
• Consumable Replenishment Tutorials
Hard Disk The following information is provided on the machine PC hard disk:
• Installation Manual
• Technical Reference Manual
• Operator Manual (in all available languages)
• Machine Tutorials
• Consumable Replenishment Tutorials
Hard Copy The following documentation is included in hard copy format with the machine:
• Installation Manual
• Operator Manual (in language specified by customer)
• Electrical Drawings (A3 format)
INTRODUCTION
MANUAL STRUCTURE
Chapter Issue 11, Jul 16 Technical Reference Manual 1.3
MANUAL STRUCTURE
The Technical Reference Manual is composed around four defined areas:
• Manual Introduction and Overview
• Machine Electrical and Electronics Areas
• Machine Modules
• Miscellaneous Information
Based upon the areas above, the manual is divided into chapters. A listing of
all chapters is detailed in the contents pages of this manual.
Chapter Structure The structure of each chapter within the manual may vary dependent upon
layout of information, (with the exception of module chapters).
All machine module chapters are given a common generic structure, enabling
the user to become familiarized with a standard module information layout. The
breakdown of a typical module chapter is detailed in the table below:
Section Heading Description
Overview Includes a diagrammatic overview with a description of the
module operation, detailing relevant sequences and/or posi-
tional information.
Pneumatic and/or Electrical
Schematic
Block diagram detailing the electrical system, including signals,
electronic components etc, (and pneumatics if necessary).
Adjustments and Settings Provides information on any adjustment and/or setting in order
to enable correct module functionality.
Replacement Procedures Where applicable, details technical instruction for the replace-
ment of individual components within the module.
Calibrations Where applicable, describes how to calibrate the module follow-
ing installation, adjustment or replacement procedures.