OM-1650-001_w.pdf - 第11页
OM-1650 8 6. Pattern Program 6. Pattern Program 6.1 Operation Data Open the "PCB Data" tab sheet in "Operation Data" and edit the "Unit PCB BBR" data. [1] [2] [3] [10] (1) (2) Sensor Type: P…
OM-1650
7
5. Preparation Before Operation
1006-001
5. Preparation Before Operation
5.1 In Sensor Mode
Procedure
(1) Create the pattern program data.
Reference
Refer to "6. Pattern Program" for details.
(2) Set the sensitivity of the bad mark detection photosensor.
Reference
Refer to "8. Sensitivity Setting of Bad Mark Sensor" for details.
(3) Operate the machine automatically after program change.
5.2 In Camera Mode
Procedure
(1) Create the pattern program data.
Reference
Refer to "6. Pattern Program" for details.
(2) Operate the machine automatically after program change.
OM-1650
8
6. Pattern Program
6. Pattern Program
6.1 Operation Data
Open the "PCB Data" tab sheet in "Operation Data" and edit the "Unit PCB BBR"
data.
[1]
[2]
[3]
[10]
(1)
(2)
Sensor Type: Photo-Sensor F4
[1]
[3]
[5]
[7]
[9]
[2]
[4]
[6]
[8]
[10]
(1)
(3)
(5)
(7)
(4)
(2)
(6)
(8)
Sensor Type: Camera F5
1006-001
OM-1650
9
6. Pattern Program
Unit PCB BBR
[1] Mode
Set one of the following options to determine whether or not the unit PCB
BBR detection (bad board reject) function should be used.
Disable
: The unit PCB BBR detection function is disabled.
Normal
: The unit PCB BBR detection is made at the standard position.
Optional
: The unit PCB BBR detection is made at an optional position.
Reference
(a) Refer to "6.2 Placement Data (P-Data)" for the standard position
details.
(b) Refer to "6.3 Placement Data (O-Data)" for the optional position
details.
[2] Sensor Type
Select either "Photosensor" or "Camera" in this text box.
Photosensor
: The bad mark sensor is used.
Camera
: The PEC recognition camera is used.
[3] Value of threshold
Set the threshold value for bad mark detection in this text box.
•
Data Input Range:
1 to 255
Reference
Refer to "9. Bad Mark Camera Test" for the threshold value.
[4] Inspection Area [mm]
Set the area for the PEC recognition camera to detect a bad mark in this text
box.
•
Data Input Range:
0.1 to 1.0
[5] Lighting Level (Coax)
Select the brightness level (one of the options described below) of the coaxial
lighting for the PEC recognition camera in this text box.
[Std], [-80%], [-60%], [-40%], [-20%],
[+20%], [+40%], [+60%], [+80%], [Off]
1006-001