00195348-0402 - MM WPC4-5-6_en.pdf - 第2页

All names identified by ® are regist ered trademarks of AS M Asse mbly Systems GmbH & Co. KG. The remaining tra demarks in th is pu blication may be tra demarks whose use by third par ties for their own purposes coul…

Titl

e page

SIPLACE WPC4, WPC5 and WPC6

Maintenance Manual

Edition 04/2010 EN

All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks

whose use by third parties for their own purposes could violate the rights of the owner.

We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we

cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary connections are included in subsequent

editions.

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany

Item no.: 00195348-0402

www.siplace.com Printed by ASM Assembly Systems

Contents

Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 3

Table of contents

1 Introduction 5

1.1 Safety Instructions 5

1.1.1 Conventions for the Use of Safety Instructions 5

1.1.2 Safety Instructions for the Power Supply 6

1.1.3 Safety Instructions for Maintenance Tasks 6

1.2 Abbreviations 8

2 Maintenance Manual WPC4, WPC5 and WPC6 9

2.1 Maintenance Tools and Equipment 9

2.1.1 Tools and Equipment 9

2.1.2 Materials 9

2.2 Maintenance Plan 10

2.3 4-Monthly Maintenance 11

2.3.1 Greasing the Linear Guide of the Feed Axis 11

2.3.2 Greasing the Linear Guide of the Non-Stop Module 12

2.4 Annual Maintenance 13

2.4.1 Preparing the Grease Gun 13

2.4.1.1 Grease Gun 13

2.4.1.2 Procedure 14

2.4.2 Greasing the Lifting Axis Spindle and Guidance 16

2.4.3 Cleaning, Greasing and Checking the Feeder Axis Toothed Belt 18

2.4.4 Cleaning, Greasing and Checking the Lifting Axis Toothed Belt 20

2.4.5 Greasing the Height Adjustment Spindle 22

2.4.6 Cleaning the Feeder Axis Sliding Rails 23

2.4.7 Checking the Waffle Pack Trays 23

2.4.8 Checking the Fiducials 23

2.4.9 Checking the Fan 24

2.4.10 Check the Machine Safety 24