CM101.pdf - 第2页

Latest CM-series evolution for scalable, modular manufacturing High-speed multi-functionality with one beam and one head Enhanced productivity of microchips Includes latest functionality for high quality placement For hi…

100%1 / 4
1,430 mm
*3
0402 (01005") chip to L 12 x W 12 x T 6.5 0402 (01005") chip to L100 x W 50 x
T
15 0603 (0201") chip to L 100 x W 90 x T 25
MODEL NUMBER NM-EJM5B
PCB
50 mm x 50 mm
DIMENSIONS
460 mm x 360 mm
HEAD TYPE HIGH-SPEED (12 Nozzles) HIGH-SPEED (LS8 Nozzles) MULTI-FUNCTION
*5 *6
(3 Nozzles)
0.144 s/chip (for type A-2 head) 0.19 s/chip (for type A-0 head) 0.8 s/QFP (for type B head)
±40 µm/chip (Cpk≥1) ±50 µm/chip ±35 µm/chip (Cpk≥1) ±50 µm/chip ±35 µm/chip (Cpk≥1)
PCB EXCHANGE TIME 4.0 s (When no components are placed on the back of the PCB)
ELECTRONIC SOURCE
*1
3-phase AC 200, 220, 380, 400, 420, 480 V 1.4 kVA
PNEUMATIC SOURCE
*2
0.5 MPa, 150 L /min (A.N.R.)
DIMENSIONS
*2
1,530 mm
1,807 mm
MASS
*4
1,720 kg
CM101-D
Min L x W to
Max L x W
Maximum speed
Placement accuracy
W
D
Component dimensions (mm)
H
*1
The 0402 chip requires a specific nozzle/feeder. Please contact us for details.
*4
Main body only. This may depend on option.
*2
Main body only
*5
When T is more than 11.5mm, special nozzle needed.
*6
When T is more than 21mm, special nozzle needed.
*3
Excluding monitor and signal tower
note: Values such as maximum speed and placement accuracy may vary depending on operating conditions.
Please refer to the specification details.
CM101
-D
Modular Placement Machine
• Unites technologies of our industry-leading CM-series into a lean modular solution
• Flexible solution accommodates production variations with ease
• Minimal investment for quick ROI
• Compatible with other CM-series equipment
Electronic Assembly Mounting System
The tape reel holder is optionalHigh-speed head (12 nozzles)
Latest CM-series evolution for
scalable, modular manufacturing
High-speed multi-functionality
with one beam and one head
Enhanced productivity
of microchips
Includes latest functionality
for high quality placement
For high-speed head (12 nozzles)
Head-installed type
For high-flexibility head (LS8 nozzles)
Main body-fixed type
Equipment Configuration*
High-speed Placement Type
• High-speed head (12 nozzles)
• Component types:70
(8mm double feeder)
High-speed Multi-function Type
• High-flexibility head (LS8 nozzles)
• Hand setting tray
• Nozzle replaceable during operation
Multiple Component
Supporting Type
• Component types:140
(8mm double feeder)
Multi-function Type
• Multi-function head (3 nozzles)
• Direct tray
• 3D sensor
*Please contact us for configuration types.
Placement Speed (Type A-2)
0.144 s/chip 25,000 cph
Placement Head Type
A head can be selected from three types in accordance
with a production pattern.
Type A-2
• High-speed
head
(12 nozzles)
Type A-0
• High-
flexibility
head
(LS8 nozzles)
Type B
• Multi-
function
head
(3 nozzles)
Chip Thickness Measuring
Sensor (Optional)
• Component thickness
measurement function
Board Warp Measuring Sensor
(Optional)
• Placement height is
controlled by measuring
board warp
• Unites technologies of our industry-leading CM-series into a lean modular solution
• Flexible solution accommodates production variations with ease
• Minimal investment for quick ROI
• Compatible with other CM-series equipment
Concept
…
Includes latest component
support functionality
Excellent compatibility
with CM-series
Incremental capacity with
continuous evolution support
High
productivity
25,000 cph
Flexible from
high-speed to multi-
function support
Supports up
to 140 component
types
Excellent
compatibility
Incremental
capacity
Evolution
after installation
Ultimate Incremental Capacity
• Add machines as production increases
• Compatibile with latest technical development
• Cost-effective commonality accross series
Investment Costs
(cph) 25,000 50,000 75,000 100,000
Conventional high-flexibility heads cover a wider range of
components. Newly developed high-flexibility heads
(LS8 nozzles) can support up to 100 x 50mm components.
Component Height (mm)
Component size (mm)
*Multi-functional heads (3 nozzle) are not available for 01005" (0402) components.
Achieve multi-
functionality at low cost
via newly developed
hand-setting trays and
ceramic nozzles.
Hand Setting Tray Ceramic Nozzle
The CM101 is fully compatible with CM-series in accordance
with module design concepts.
Placement Heads (12, 8, 3 nozzles)
Common Nozzles
3D Sensor
Direct Tray
Feeder
Tape Feeder Bulk Feeder Stick Feeder
8mm to 104mm
The functions under development are included.
Touch
Panel
Operation
Placement
Data
Basic Model
Component Support
Reinforcement
Wide Component
Capability
Production
Reinforcement
Gradual Production
Reinforcement
CM101
CM212
CM602
Productivity and component support capability
Compatibility
with the Models
of the CM Series