AMS07_VEGO_Dynamic_181217_DS_CC_E.pdf - 第2页

AS Y S A utomatisier ungssysteme GmbH Benzstrasse 1 0, 891 60 Dornstadt, Germany T el (+49) 7348 9855 0 Fax (+49) 7348 9855 91 info@asys.de For more inf ormation visit www .asys-gr oup.com Subject to c hange without noti…

100%1 / 2
VEGO Series – A New Generation of Handling Modules
VEGO Dynamic
AMS07_VEGO_Dynamic_181213_DS_CC_E
Description
The line unloader AMS 07 provides an automatic magazine
exchange for continnous loading into a magazine. The unit con-
sists of two loading and two unloading conveyors for maga-
zines, two independent lifting axles with magazine platforms,
a transfer conveyor with shuttle mechanism to the previous
unit and an electrically driven pusher. The unloading conveyors
are situated parallel to each other on the lower level and the
loading conveyors are situated directly above.
The magazines are transported over the loading conveyor and
clamped in place. The pusher then slides the PCB’s into the
magazine. The full magazine is then transported over the lower
(unloading) conveyor and stored until manual removal.
Features
_ Automatic magazine change with magazine clamps
at the top and the bottom
_ Loading conveyors situated parallel to each other on the
upper level, unloading conveyors situated directly below
_ Minimal oor space required through optimal positioning
of the transport conveyors
_ Double track loading using a shuttle mechanism
_ Cycle time < 12 sec
Options
_ Transport height 950 mm ± 50 mm
_ Automatic width adjustment
_ Duallane version
_ Good/bad sorting
_ Electrical width adjustment
VEGO AMS 07
Magazine loading system with magazine buffer and automatic magazine change
ASYS Automatisierungssysteme GmbH
Benzstrasse 10,
89160 Dornstadt, Germany
Tel (+49) 7348 9855 0
Fax (+49) 7348 9855 91
info@asys.de
For more information visit
www.asys-group.com
Subject to change without notice.
Some general descriptions and performance characteristics may
not be applicable to all products. Technical specications are
subject to change without notice. Only features and technical
data provided in purchasing contract are legally binding.
Printed in Germany
VEGO AMS 07
Machine Conguration
Transport height
Max. transport width
Interface
Transfer direction
Operating side
Fixed rail
850 mm ± 50 mm
460 mm
SMEMA, Siemens
from left to right
Front of the machine
Front of the machine
Magazine Size
Magazine length
Magazine width
Magazine heigth
Slot spacing
Buffer spacing
Magazine buffer input conveyor
Magazine buffer output conveyor
Single magazine weight
535 mm
530 mm
568 mm
5- 20 mm
1- 50 Slots
2x3 (2x4)
b)
2x3 (2x4)
b)
max. 30 kg
Panel Dimensions
Panel length
Panel width
Panel thickness
Component clearance
Panel weight
70 to 460 mm
c)
50 to 460 mm
0.5 to 4.5 mm
± 40 mm
to 3 kg
Installation Requirements
Power supply
Power supply system
Power consumption
Air supply
Air consumption
230 V / 115 V, 50 / 60 Hz, ± 10%
L1 + N + PE
0,75 kW
6 bar
10 Nl/min
Machine Description
Length x Width x Height
a)
Netto weight
Noise Level
2485 x 1562 x 1652 mm
570 kg
< 75 dB
Upgrades
Machine networking via IC Net
a) other dimensions on request
b) depending on the magazine size
c) Optional 510 mm with monitoring
Subject to change without notice.
Some general descriptions and performance characteristics may
not be applicable to all products. Technical speci cations are
subject to change without notice. Only features and technical
data provided in purchasing contract are legally binding.
Printed in Germany