FLEXLINE-CAD_INM.pdf - 第2页
Impor tant (1) No part of this document may be copied or reproduced w ithout the prior permission of JUKI Corporation. (Including so ftware and program) (2) The contents of this document are subject to change wi thout no…
E0120CAD1AA
Rev.25
Flexline CAD
INSTRUCTION MANUAL
Thank you for purchasing a product of our company.
CAUTION
In order to ensure safe use of Flexline CAD, be sure to read this
Manual before using the machine.
After reading this Manual, keep it at a fixed location so that it will be
available at any time.
Important
(1) No part of this document may be copied or reproduced without the prior
permission of JUKI Corporation. (Including software and program)
(2) The contents of this document are subject to change without notice.
(3) This manual is prepared with extreme care. However, if you have any question
or find any error or omission in writing, contact our dealer or JUKI Corporation.
(4) JUKI Corporation shall disclaim all the responsibility for any trouble resulting
from the user's abnormal operation regardless of Item (3).
(5) Microsoft, Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and /or other countries.
The company names and product names mentioned in this document are
generally registered trademarks or trademarks of the respective companies.
Table of Contents
PART 1 BASIC PART ································································································· 1
Chapter 1 Introduction ··························································································· 2
1.1 Organization of the Manual ................................................................................................ 2
1.2 Introduction ......................................................................................................................... 4
1.3 Outline of Flexline CAD product ......................................................................................... 4
Chapter 2 Outline of Operations ·············································································· 5
Chapter 3 Install ···································································································· 7
3.1 Environment required to use Flexline CAD........................................................................ 7
3.2 Deleting (uninstalling) old version Flexline CAD................................................................ 8
3.3 Installing Flexline CAD ....................................................................................................... 9
3.4 Installing Flexline CAD *1 ................................................................................................ 9
3.4.1 Installing Microsoft .NET Framework 2.0 .................................................................. 14
3.4.2 Installing Microsoft .NET Framework 4.0 .................................................................. 14
3.4.3 Installing Microsoft Visual C++ 2005 package that can be distributed again ........... 14
3.4.4 Installing Microsoft Visual C++ 2010 package that can be distributed again ........... 14
3.4.5 Installing Microsoft Visual C++ 2013 package that can be distributed again ........... 14
3.4.6 Installing MSXML 4.0 SP2 Parser and SDK ............................................................. 14
3.4.7 Installing the driver for the protect module ................................................................ 18
3.5 Installing Flexline CAD Version 5.10 or earlier *1 ............................................................ 21
3.6 Deleting (uninstalling) Flexline CAD ................................................................................ 22
3.7 Deleting (uninstalling) the driver for the protect module .................................................. 22
3.8 Troubleshooting ................................................................................................................ 22
3.8.1 Flexline CAD does not start up when the protect module is connected to the PC. . 22
Chapter 4 Chapter 4 Trying to Start Flexline CAD ····················································· 23
4.1 Starting Flexline CAD ....................................................................................................... 23
4.2 Exiting Flexline CAD *1 ................................................................................................... 25
4.3 Screen configuration of Flexline CAD *1 ........................................................................ 25
4.3.1 Menu bar of Flexline CAD ......................................................................................... 25
4.3.2 Flexline CAD's Tool Bar............................................................................................. 26
Chapter 5 Batch Conversion and Sectional Conversion *1 ······································· 27
5.1 Batch conversion mode .................................................................................................... 27
5.2 Sectional conversion mode .............................................................................................. 28
PART 2 OPERATION PART ························································································ 30
Chapter 6 Trying to perform conversion *1 ····························································· 31
6.1 Setting the batch conversion mode .................................................................................. 31
6.2 Adding an input file ........................................................................................................... 31
6.3 Converting CAD data ....................................................................................................... 34
6.4 Viewing Conversion Logs *1 ........................................................................................... 35
Chapter 7 User-Defined Wizard ·············································································· 36
7.1 Starting up the new format creation screen *1 ................................................................ 37
7.2 Global setup screen *1 .................................................................................................... 38
7.2.1 Format information .................................................................................................... 38
7.2.2 Section ....................................................................................................................... 40
7.2.3 PWB unit and placement unit ................................................................................... 41
7.3 Coordinate transformation ................................................................................................ 42
7.3.1 Standard Transformation Settings screen................................................................. 42
7.3.2 Custom transformation settings (PWB) screen ........................................................ 43
7.3.3 Custom transformation settings (placement) screen ................................................ 44
7.4 Section definition screen .................................................................................................. 48
7.4.1 Reading the file .........................................................................................................
48