TM2817.Improvement of Parts Dump Function on resetting operations.pdf - 第2页
Y AMAHA MOTO R CO.,L T D IM Company SMT Eng ineering Group MDOC-SOFT50103 2/9 1. T arget T arget m odels and suppor ted vers ions of thes e speci fications are as f ollows. T able1.1 T arget m odels and suppo rted versio…
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
1/9
Improvement of Parts Dump Function on resetting
operations
Contents
Improvement of Parts Dump Function on resetting operations.......................................................... 1
1. Target .........................................................................................................................................2
2. Summary....................................................................................................................................2
3. Outline........................................................................................................................................3
3-1. ①Transit.St→Dump.St ...................................................................................................3
3-2. ②Machinehead→Dump.St............................................................................................. 3
3-3. ③Trayback .....................................................................................................................4
3-4. ④Machinehead→Recovery pallet (Only YS24X)...........................................................4
4. How to set up .............................................................................................................................5
5. Limitations..................................................................................................................................9
No. Date Content of revision
000 2011/02/17 Create
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
2/9
1. Target
Target models and supported versions of these specifications are as follows.
Table1.1 Target models and supported versions
Item Contents Note
Target Model YS Series Mounter※、YG12Series、YG300
Supported Version V3.25STD R1.000
※The operation of Dump Pallets is supported as standard only for YS24X.
2. Summary
Dumping after resetting operations used to be limited only to the dust box before.
By this improvement, the dump station and the dump pallet are also possible to dump into.
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
3/9
3. Outline
It explains the outline of operations about the following additional functions.
3-1. Transfer of parts from Transit Station to Dump Station （①Transit.St→Dump.St）
3-2. Transfer of parts from Machine-head to Dump Station （②Machinehead→Dump.St）
3-3. Transfer of parts from Machine-head to Pick Position （③Trayback）
3-4. Transfer of parts from Machine-head to Recovery Pallet (Only YS24X)
（④Machine-head→Recovery Pallet）
3-1. ①
①①
①Transit.St→
→→
→Dump.St
It transfers parts existing on the supplying routes of dYTF parts to Dump Station on resetting
the operation.
It is necessary to be equipped with dYTF and Dump Station to use this function.
dYTF parts were transferred to Transit Station on resetting the operation before. So operators
had to take them away by the hand. This function makes it easier to take parts away by
transferring them from Transit Station to Dump Station on resetting the operation.
3-2. ②
②②
②Machine head→
→→
→Dump.St
Parts being carried by the machine head are transferred into Dump Station on resetting the
operation.
It is necessary to be equipped with Dump Station.
All parts being picked by the machine head used to be dumped into Dust Box on resetting the
operation. With this function, it became possible to transfer parts to Dump Station on resetting
the operation.