Bench-Top-Product-Guide-2015.pdf - 第2页
MANUA L PISTONS AND PLU NGERS Available in 3, 5 , 10 and 30cc Pistons Replace XX with 03, 05, 10 or 30 to deter mine piston size Replace **** w ith -LUB for lubrica ted version 7XX00 02MPK 7XX00 02M****PK e.g. for a 10c …
DISPENSERS
Entry level digital dispenser
TS250
Digital Dispenser
0 – 100 psi (0 to 6.9 bar)
for general dispensing
applications
TS255
Digital Dispenser 0 -15 psi
(0 to 1 bar) for precision dispensing
of low viscosity fluids
Features:
- User friendly firmware for quick and easy setup tacks
- Digital timer with 0.020 to 60.000s timer range
- Accurate and repeatable
- Adjustable vacuum
- Small footprint and stackable
- Supplied with universal power adaptor, air hose, foot pedal
sample tips, syringe, syringe adaptor and syringe stand
Advanced digital dispensers
TS350
Digital Dispenser
0 – 100 psi (0 to 6.9 bar)
for a wide range of fluid viscosities
TS355
Digital Dispenser 0 -15 psi
(0 to 1 bar) for precision dispensing
of low viscosity fluids
Features:
- All read-outs displayed digitally: Time, pressure and
Vacuum
- Digital timer with 0.008 to 60.000s timer range
- Accurate and repeatable
- User friendly firmware with 10 programmable
Memories and 4 operating modes
- Small footprint and stackable
- Supplied with universal power adaptor, air hose, foot pedal
sample tips, syringe, syringe adaptor and syringe stand
700 SERIES CONSUMABLES
Receiver head assembly – available in 3, 5, 10 or 30/55cc
Replace XX with 03, 05, 10 or 30 to determine syringe size
Replace * with 3 for 0.9M air hose or 6 for 1.8M air hose
7XX0*RHB
e.g. for a 10cc 0.9M receiver head, the part number is 71003RHB
End caps - available in 3, 5, 10 or 30/55cc
Replace XX with 03, 05, 10 or 30 to determine cap size
7XX000CBPK
e.g. for a 10cc end cap, the part number is 710000CBPK
Air powered pistons - available in 3, 5, 10 or 30/55cc
Replace XX with 03, 05, 10 or 30 to determine piston size
7XX0009WPK White Wiper
7XX0007BLPK Blue “Easy Flow”
7XX0006RPK Red Straight Walled
e.g. for a 10cc wiper piston, the part number is 7100009WPK
Syringes - available in 3, 5, 10, 30 and 55cc
Replace XX with 03, 05, 10, 30 or 55 to determine syringe size
Replace * with N for natural, D for dark amber or B for black syringes
7XX0LL1*PK
e.g. for a 10cc natural syringe, the part number is 7100LL1NPK
Stand-up tip cap
7015STC-PK
Tip caps double Helix thread
7015LLPK Orange tip cap
TE7015LBPK Black tip cap
DISPENSING TIP OPTIONS
TE Series Tips - available in 14, 15, 18, 20, 21, 22, 23, 25, 27, 30
and 32 gauge
Replace XX with table over leaf to determine gauge
Replace *** with 025, 050, 100 or 150 to determine cannula length
TE7XX***PK
025 ¼" (6.35 mm) Gauges 18 to 32
050 ½" (12.7 mm) Gauges 14 to 30
100 1" (25.4 mm) Gauges 14 to 23
150 1-½" (38.1 mm) Gauges 14 to 23
e.g. for an 18 gauge ½" TE needle, the part number is TE718050PK
TE Series Bent Tips - available in 14, 15, 18, 20, 21, 22, 23, 25, 27
and 30 gauge
Replace XX with table over leaf to determine gauge
Replace *** with 050, 100 or 150 to determine cannula length
Replace with 45 or 90 to determine bent angle
TE7XX***BPK
050 ½" (12.7 mm) 90° Gauges 14 to 30
050 ½" (12.7 mm) 45° Gauges 14 to 30
150 1-½" (38.1 mm) 45° Gauges 14, 18 & 21
e.g. for an 18 gauge needle bent at 45° at ½" length, the part number
is TE718050B45PK
TT Tips - available in gauges 14, 16, 18, 20, 22, 25 & 27
Replace XX with 14, 16, 18, 20, 22, 25 or 27 to determine gauge
TTXX-DHUV-PK
TTXX-RIGID-PK
e.g. for an18 TT rigid tip, the part number is TT18-RIGID-PK
TS-P Plastic Tips - available in gauges 15, 16, 18, 20, 22 & 25
Replace XX with 15, 16, 18, 20, 22 or 25 to determine gauge
TSXXP-1-1/2PK 1-½" (38.1 mm) Flexible tip
e.g. for an 18 gauge TS-P tip, the part number is TS18P-1-1/2PK
Brush Tips - available in gauges 16, 18 & 22
Replace ** with 16, 18 or 22 to determine gauge
BT**-SOFTPK Soft Bristle
BT**-STIFFPK Stiff Bristle
e.g. for an 18 gauge stiff brush tip, the part number is BT18-STIFFPK
MANUAL PISTONS AND PLUNGERS
Available in 3, 5, 10 and 30cc
Pistons
Replace XX with 03, 05, 10 or 30 to determine piston size
Replace **** with -LUB for lubricated version
7XX0002MPK
7XX0002M****PK
e.g. for a 10cc dry piston, the part number is 7100002MPK
e.g. for a 10cc lubricated piston, the part number is 7100002-LUBPK
Plungers
Replace XX with 03, 05, 10 or 30 to determine plunger size
7XX0004PPK
e.g. for a 10cc plunger, the part number is 7100004PPK
*Syringes need to be ordered separately
ACCESSORIES
Manual Syringe Gun
Lightweight syringe applicator gun provides
excellent control for medium/high viscosity
fluids. Easy to use. No dripping or mess.
TS710SG 10cc
TS730SG 30cc
Dispensing Tip Kit
This kit contains a variety of the most popular
700 Series TE, TE Bent & TT dispense tips.
TN00DKIT
APPLICATIONS
Heat sink compound
Dispense heat sink compound/thermal transfer
compound onto electronic devices.
SMA (Surface Mount Adhesive)
Dispense SMA between surface mount component
pads to ensure adhesion during PCBA reflow process
Grease
Dispense grease onto product surface for lubrication.
Solder paste
Dispense dot and beads for PCBA assembly.
Flux
Dispense flux onto PCBA pads to air solder process.
Silicone
Dispense beads of silicone to form enclosure gaskets.
Anaerobic
Dispense low viscosity anaerobic onto screw/nut
threads. 0 – 15 psi (0 to 1 bar) dispenser recommended.
Dispense Tip Color Coding
www.techconsystems.com
Bench Top Product Guide