EN 2.pdf - 第2页

在线预览 EN 2.pdf PDF 文档。

For The Next Decade

DECAN-Series

F2/L2

Service Manual

Chapter 2. Troubleshooting

Model

DECAN Series

Company

SAMSUNG TECHWIN

Module

Troubleshooting

Total Pages

Table of Contents

[Malfunction classification table] ......................................................................... 4

[A1000] Main air pressure noises due to leakages. ........................................ 7

[A1001] Head air pressure noises due to leakages. ....................................... 8

[A1002] Abnormal air pressure supplied to the equipment. ............................ 9

[B1000] Not all the motor axes powered up when ready on. ..................... 10

[B1001] Fan on the PC rack not operating. .................................................. 11

[B1002] No interface between equipments. .................................................... 12

[B1003] Not Defined Error Code occurs. ....................................................... 13

[B1004] Main circuit breaker(MCCB) tripped. ................................................. 14

[C1000] STEF,ST1F,ST1R,STXF,WS Alarm occur. ........................................ 15

[C1001] PCB input. discharge failed.(belt operation failure) ......................... 16

[C1002] BUT Up/Down error. .......................................................................... 17

[C1003] Stopper up/down sensor detection failed. ........................................ 18

[C1004] "AMP not activated." error occurs.(axis homing failed.) .................. 19

[C1005] Edge Fixer On, Off failures. .............................................................. 20

[C1006] "Motor or home location changed." error occurs. .......................... 21

[C1007] STEF, or STXF-S tracking error occurs. .......................................... 22

[C1008] Conveyor width adjustment errors. ................................................... 23

[C1009] PCB detection error occurs. .............................................................. 24

[C1010] The PCB does not stop at the normal location. ............................. 25

[C1011] Cannot convey the PCB from equipment to equipment. ................ 26

[C1012] Noises and vibration when operating the conveyor belt. ................ 27

[D1000] Front/rear control panel/teaching box do not operate. .................... 28

[D1001] Front/rear keyboard or mouse do not operate.

(USB can't be used.) ....................................................................................... 29

[D1002] Tower Lamp defects (buzzer sound not heard). .............................. 30

[E1000] Error or alarm occurs when the head picks up the ANC nozzle

or places it in the ANC. ................................................................................... 31

[E1001] Feeder operation failure, and feeder base slot operation error. .... 32

[E1002] "Feeder Unlock detected." error occurs. ........................................... 33

[E1003] "ANC Shutter can't be closed or opened." error occurs. ................ 34

[E1004] When the equipment is turned on, the feeder is fed first. ............. 35

[E1005] Feeder base fails to mount or dismount feeders in it. ................... 36

[E1006] "Feeder Part Clamp is released." error occurs. ............................... 37

[E1007] Feeder Tape installation error. .......................................................... 38

[E1008] Feeder feeding error. ......................................................................... 39

[E1009] Feeder vinyl discharge error. ............................................................. 40

[F1000] Ball spline damages, bending or shaking. ........................................ 41