TM3200.Schedule task result displays_Manual.pdf - 第2页

SMT Software Engineering G roup IM Operations Y AMAHA MOTOR CO., L TD.   MD OC-SOFT50138  2/13  1. T arge t Model a nd T ar get V ersion The target model and t he target v ersion of this s pecificatio n are as f oll…

100%1 / 13
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50138
1/13
Schedule Task Result Displays Manual
Chapter
Schedule Task Result Displays Manual................................................ 1
1.
The target model and the target version ........................................... 2
2.
Outline ....................................................................... 2
3.
Detail......................................................................... 3
3.1.
Explanation for the action when the Schedule Task error is detected............... 3
3.2.
Monitor Display ............................................................ 4
3.3.
History Display............................................................. 6
3.4.
Schedule Task manual operation from the Schedule Task monitor ................. 8
3.5.
About update of “Schedule Task Last Date” by the Schedule Task manual execution 9
3.6.
About Schedule Task result display at the time of the movement abnormality ...... 11
4.
Setting ...................................................................... 12
4.1.
Setting of the Schedule Task result display function ............................ 12
5.
Limitations ................................................................... 13
Revision
Content Date
1 Create 2011/8/30
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50138
2/13
1. Target Model and Target Version
The target model and the target version of this specification are as follows.
Table1 Target Machine and Software
Machine, Software Version Remarks
VGOSV3 Mounter Application Software
(YG300 is not supported.)
V3.27STD R1.000 or later
2. Outline
This function displays Schedule Task Result of "Vacuum Check", "Nozzle Check" and "Shaft
Cleaning Blow" set on "Schedule specification" on the monitor screen after the check of all
tables are done.
The "Schedule Task result displays" function (describes “this function” as below) has been
added to [Specification information] - [Schedule specification] of factory setting (VmSpec), it
is described below.
Fig.3.1 Schedule specification screen
Added the “Schedule Task result displays” function.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50138
3/13
3. Detail
3.1. Action when the Schedule Task error is detected
After the Schedule Task process of all tables, the following messages are displayed if an error
is detected with the head or the nozzle.
The “Nozzle Check Result List” dialog is displayed when "ERROR CLEAR" button is tapped on
the Ea7540 message screen. (Refer to the following chart image.)
When more than one Schedule Task is executed at the same time, their warning messages
are displayed after all Schedule Tasks finishes.
Fig.3.2 Operation image at the error detection
Schedule Task is finished.
There were error heads.
When the error is detected with the several kinds
of nozzle,
Error nozzle number is displayed in parentheses.
On the "Schedule Task monitor screen" described later,
you
can confirm which nozzle has the error.
The line of the head which is not checked is blank.
The Schedule Task Result message
When error head or nozzle exists after the executio
n
of all tables, this error message is displayed.
The Check Results List dialog is displayed