spg2_screen_printer_brochure.pdf - 第2页

SPG2 Model N o .NM-EJ P 1B Model I D ●Attack angle variable squeegee (option) The set squeegee angle can be adjusted, using the front and rear squeegee vertical axes, between 45° and 70° . ●Top/side clamper (movable type…

100%1 / 2
2020
Model ID
Model No.
PCB dimensions
PCB exchange time
Printing accuracy
Pneumatic source
Electric source
Dimensions
Mass
SPG2
NM-EJP1B
L 50 × W 50 to L 510 × W 510
14 sec including transfer, PCB positioning and recognition, printing and regular cleaning (when PCB is L250 × W150
)
0.5 MPa, 30 L/min (A.N.R.) (Blower motor vacuum spec), 400L/min (A.N.R.) (ejector vacuum spec)
W 1 580 × D 1 800 × H 1 500
1 600 k
g
*Values such as cycle time and accuracy may vary depending on operating conditions. *Please refer to the "Specification booklet" for details.
*1: The max PCB width changes when “Paper-less cleaning,”
“Support pin automatic exchange” or “Attack angle variable squeegee” has been selected.
For details, see specifications.
*2: PCB exchange time varies depending on the machine in the pre-process and the post process,
the PCB size, the use of a PCB pressing-down unit and so forth.
*3: For mask specifications, please see the specification. *4: Including blower and vacuum pump"Option"
*5: Except for the signal tower and the touch panel. *6: With full options
Screen Printer
(
mm
)
Screen frame dimensions
(
mm
)
(
mm
)
Supporting high accuracy/density printing
Enhancing automation and labor-saving functions
2Cp ±15.0 µm  6σ（±3σ）
Repeatability
2Cpk ±4.0 µm  6σ（±3σ）（Under conditions specified by Panasonic）
（Under conditions specified by Panasonic）
L 736 × W 736、L 750 × W 750、L 650 × W 550、L 600 × W 550
L 550 × W 650、L 584 × W 584、L 736 × W 584、L 584 × W 736
1-phase AC 200, 220, 230, 240 V ±10V (tap changing available) Max. 2.5 kVA
High-Quality Printing
world-class
solutions
manufacturing
for
* It may not conform to Machinery Directive and EMC Directive in
case of optional configuration and custom-made specification.
DI ledoM
Model ID
Model No.NM-EJP1B
SPG2
Support pin automatic exchange
(option)
*6
*5
*4
*1
*2
*3
Electronics Assembly System
catalog
SPG2
Model No.NM-EJP1B
Model ID
●Attack angle variable squeegee
(option)
The set squeegee angle can be adjusted, using
the front and rear squeegee vertical axes,
between 45°and 70°.
●Top/side clamper (movable type)
(option)
Pressing down on PCB edge faces increases
printing quality of warped PCB.
Either PCB upper or side face can be selected
for correction.
●New operation panel
① A large-sized panel (15-inch) introduced to
increase ease of use and visibility.
② Screen configuration reviewed (a reduction
in the number of screens) to decrease the
screen handling time required.
Supporting high accuracy/density printing
Mask cleaning without cleaning paper or
solvent, eliminating paper and solvent
exchange operations.
Automated collection/arrangement of support
pins during changeover to save manpower.
An increase in size from 8.4- to 15-inch
Ｍ2Ｍ Line solution
Enhancing automation and labor-saving functions
SPG2
other SPI
NPM-WX
●Support pin automatic exchange
(option)
Top clamp
Side
clamp
When set to
45°
When set to
70°
Recognition
camera
Enlarged view
Nozzle configuration drawing
Pin mounting nozzle
Pin initial position
SPG SPG2
Touch panel
◆Size: 15-inch
Trace data
Automatic changeover
Component verification
APC correction data
Without printing
position correction
0402 parts
With printing
position correction
According to the correction data of shifted
printing positions analyzed by solder paste
inspection (APC correction data),
it corrects printing positions(X ,Y ,θ).
*3D inspection equipment of other companies can also be connected.
By connecting with a host system (LNB,iLNB…),
the followings can be supported:
●Automatic changeover
●Material verification (solder/mask/squeegee…)
●Trace data output
* Please inquire with your sales representative for more details.
●Paper-less cleaning (option)
Solder supply automated to promote labor
saving and operation without interruption.
●Holed pot type automatic solder supply
(option)
3-1-1 Inazu-cho, Toyonaka City, Osaka 561- 0854, Japan
TEL +81-6-6866-8675
FAX +81-6-6862-0422
Inquiries…
Safety Cautions
●Please read the User's Manual carefully to
 familiarize yourself with safe and effective
 usage procedures.
● To ensure safety when using this equipment, all work should be
 performed according to that as stated in the supplied Operating
 Instructions. Read your operating instruction manual thoroughly.
Panasonic Group products are built with the environment in mind.
●Changes in specifications and appearance may be made without notice for product improvement.
●Homepage
Panasonic Corporation
Process Automation Business Division
Ver.January 1, 2020
All data as of January 1, 2020
©
Panasonic Corporation 2020
panasonic.com/global/corporate/sustainability
Please check the homepage for the details.
industrial.panasonic.com/ww/fa-jisso