DS-Spectrum-II-S2-900-NordsonASYMTEK.pdf - 第2页

Page 2 of 3 Manual or Programmable fluid and valve pressures Optional Fi d s - on - the - Fl y ™ software for high - speed fiduci al capture Single - or dual - lane configurat ion Optional p re - and post - dispense heat…

Page 1 of 3

The scalable Spectrum II series is ideal for high-

volume production of advanced dispensing

processes, including underfill, cavity fill, die attach,

and encapsulation.

Scalability

. With its flexible, scalable configuration,

the Spectrum II can be configured with single or

dual lanes, and up to six heat stations with the dual-

lane configuration. The platform is easily upgraded

in the field when process needs change.

At only 600mm wide without optional pre- and

post-heating stations, the Spectrum II maximizes

use of precious production floor space.

Advanced Process Control

. The Spectrum II

reduces process variation, increases yield, and

reduces cost. Software-managed temperature, fluid

and air pressure provide closed-loop control that

eliminates the need for operator adjustment.

Calibrated Process Jetting (CPJ) automatically

maintains volumetric repeatability during long

production runs. Controlled Process Heat (CpH

™

)

adds recipe-controlled heat management for

improved thermal efficiency.

The Spectrum II’s standard digital vision system’s

high-brightness LEDs with RGB three-color

control provides good image contrast and detection

capabilities for more accurate and consistent pattern

recognition. For the most challenging vision

applications, the Monocle

™

Vision Package (MVP)

enhances contrast and field of view size and

resolution even further.

Jet Technology

. Patented non-contact jetting

offers many advantages over traditional needle

dispensing. The NexJet

8 system shoots “on the

fly” using a patented high-speed actuator, jetting

precise volumes of fluid in dots, lines and patterns

with flow rates up to 500 mg/second and 300

dots/second.

Expert Value and Support.

With over 30 years

of precision fluid dispensing experience and a

reputation for the best closed-loop process controls,

Nordson provides customers a reliable partner for

fluid dispensing development and production.

From initial process development through full-scale

production, you are supported by our experienced

worldwide engineering, applications development

and technical service network.

Features and Benefits



Scalable design meets current and future

requirements for maximum return on investment



High precision X-Y-Z motion system



Total system wet dispense accuracy for dots and lines



Patented, closed-loop process controls for

consistent dispense weight over long production

runs



Optional independent X-Y-Z dual-simultaneous valve

dispensing for increased productivity



Integrated vision system with on- or off-axis

lighting



Optional integrated substrate heating for up to 6 stations



Optional programmable dual-axis tilt

ASYMTEK Spectrum

II S2-900 Series

Scalable solutions for high-volume manufacturing and assembly

Page 2 of 3

Manual or

Programmable fluid

and valve pressures

Optional Fids-on-the-Fly

™

software for high-speed

fiducial capture

Single- or dual-lane

configuration

Optional pre- and post-

dispense heat stations

Non-contact laser or tactile

height sensor choices

Optional Tilt Jetting or Automatic

Dual Simultaneous (ADS)

dispensing options

Patented Calibrated Process Jetting

(CPJ) and Mass Flow Calibration

(MFC) weight scale option

Features and Configurations

Additional Optional Features and Configurations

CpH

™

- Controlled Process Substrate Heat

Dual-action dispensing (two applicators operate

independently)

Exterior bulk fluid reservoir: 600 cc (20 oz), includes remote

feed and fluid level sensor

Hot plate, process development (batch processing)

Low fluid sensor, magnetic or capacitive

Cleanroom compatibility

Monocle

™

Vision Package (MVP) for increased contrast, field

of view, and vision resolution

SECS/GEM interface

Ventilation Interlocking for Volatile Organic Compound

dispensing (e.g. flux or primer)

Key System Specifications

Motion System

Z repeatability

(1)

: ±15 µm (0.0006 in.), 3 sigma

X-Y repeatability

(1)

: ±15 µm (0.0006 in.), 3 sigma

X-Y acceleration: 1 g peak

X-Y velocity: 1 m/s peak (40 in./s)

X-Y-Z encoder resolution: 1 µm

Wet Dispensing Accuracy & Repeatability

Single Applicator:

≥ 1.0: ±35 µm (0.0016 in.)

≥ 1.0

(1)

: ±40 µm (0.0016 in.)

Z-Gap Performance

Z-Gap Repeatability

(2)

: ±15 µm (0.0006 in.), 3 sigma

Minimum Z-Gap Capability: 50 µm (0.002 in.)

Dispense Area (X-Y)

339 x 410 mm (13.3 x 16.1 in.)

Conveyor

Min. board/carrier width

(3)

: 34 mm (1.3 in.)

Max. board/carrier thickness: 12 mm (0.5 in.)

Max. board/carrier length: One station: 340 mm (13.4 in.)

Three stations: 320 mm (12.6 in.)

Min. board/carrier length: 25 mm (1.0 in.)

Max. board/carrier width: Single lane: 535 mm (21.1 in.)

Dual lane: up to 228 mm (9.0 in.)

(configuration dependent)

Facilities Requirements

System footprint: Single heat station: 600 mm wide x

1321 mm deep (23.6 x 52.0 in.)

Two heat stations: 850 x 1321 mm

(33.5x52.0 in.)

Three heat stations: 1100 x 1321 mm

(43.3x52.0 in.)

Air supply: Two air supplies: one with 3 CFM @

100 psi for contact tooling, a second

one with 1 CFM @ 100 psi for the

rest of the system (100 psi = 689 kPa,

6.8 atm)

Power (mains): Power supply accommodates 200-240

VAC, 47-63 Hz single phase, 30 A

Note: System can run on 10A, 120 VAC without heater option installed.

Ventilation: Downdraft or updraft

System weight

(4)

: 377-422 kg (830-930 lbs.)

(1)

Wet dispense C

is tested against Nordson ASYMTEK standard sealant

line path accuracy test method

(2)

Z-gap repeatability is tested with Nordson ASYMTEK standard white

ceramic, performance with other substrates may vary

(3)

Contact factory regarding smaller boards/carriers

(4)

System weight varies depending on configuration

Digital vision system

with high-

brightness RGB lighting

Page 3 of 3

Conveyor

Width

600

R481

Rear Door

294

Ventilation

104

Main Power

2085

Product Flow

1056

Ventilation

1070

Flat

Panel

869

106

Foot

R472

Front Door

488

588

Spectrum

II S2-900 Series System Dimensions

Dimensions are in millimeters

For more information, visit our

website to find your local

regional office or

representative.

We have several global locations

to serve you.

North America

Asia Pacific

EMEA

nordsonasymtek.com/global-

locations

info@nordsonasymtek.com

1977

1747

1526

948

Computer

Height

953 To Passline

109

968

1187

1321

North America Headquarters

2747 Loker Avenue West

Carlsbad, CA USA 92010-6603

+1.760.431.1919

Published August 2020

Front View

Top View

Side View