Printer 710_810 v8 Safety Features.pdf - 第2页
SAFETY FEA TURES MACHI NE SAFET Y FEAT URES 2.2 Technical Reference Manual Chapter Issue 6 Oct 06 W arning Definition W ARNING: EXCLAMA TION MARK General to all haz ards not c overed b y a spec ific warnin g. W ARNING: S…
SAFETY FEATURES
MACHINE SAFETY FEATURES
Chapter Issue 6 Oct 06 Technical Reference Manual 2.1
CHAPTER 2 SAFETY FEATURES
MACHINE SAFETY FEATURES
Introduction This section describes the various safety features that are incorporated into the
machine to provide a safe operating and maintenance environment.
Warning and
Caution Notices
WARNING, CAUTION and DANGER labels are placed on the printing machine
and notices are posted throughout the associated documentation to alert the
operator/maintainer to possible hazards which may cause physical injury or
equipment damage.
WARNING notices draw the attention of operators/maintainers to possible
general or functional hazards which may cause loss of life, serious injury or ill
health. These hazards are either inherent in the machine or arise during the
operation/implementation of procedures.
CAUTION notices alert personnel to the possibility of damage occurring to the
machine material which is likely to arise following the departure from laid-down
procedures. A caution notice does not imply danger to personnel.
An example of the format for each notice is shown below:
WARNING
LETHAL VOLTAGE. DANGEROUS VOLTAGES EXIST IN THIS EQUIPMENT.
ENSURE ALL ELECTRONIC COVERS AND MAIN MACHINE COVERS ARE
FITTED BEFORE OPERATING THIS EQUIPMENT.
CAUTION
ANTI-STATIC HANDLING.
Standard precautions must be adhered to when
handling electronic cards and configuring and inserting into the enclo-
sures.
The following label illustrated below, may be fitted to the machine, this signifies
that the user should refer to the operator manual before attempting to carry out
work on the equipment.
SAFETY FEATURES
MACHINE SAFETY FEATURES
2.2 Technical Reference Manual Chapter Issue 6 Oct 06
Warning Definition
WARNING: EXCLAMATION MARK
General to all hazards not covered by a specific warning.
WARNING: SEVER
Risk of injury due to sharp edge being present in the vicinity of the warning
label. Care should be taken when working in the vicinity of the designated
area.
WARNING: IRRITANT
Substances are present which can cause inflammation on immediate,
repeated or prolonged contact with mucus membranes or skin.
WARNING: FLAMMABLE MATERIAL
Flammable substances are present. No smoking or naked flames. Keep
away from all sources of ignition. Avoid static discharges.
WARNINIG: MOVING PARTS
Moving parts are present in the vicinity of the warning label, these parts
have the potential to cause injury. Machine covers should not be removed.
WARNING: RADIATION
Risk of injury to the eyes due to laser light being present in the vicinity of
the label. Do not look at the light source or direct reflections from a
surface.
WARNING: ELECTRICAL HAZARD
High electrical voltage is present that could cause injury or death. Do not
remove protective covers from equipment housings or override protective
devices.
WARNING: HOT SURFACE
Indicates that the marked item may be hot and should not be touched
without taking care.
WARNING: MACHINE COVERS
In order to protect personnel and to prevent damage to the machine,
covers are fitted to the machine frame. These panels must only be
removed by suitably qualified personnel.
SAFETY FEATURES
MACHINE SAFETY FEATURES
Chapter Issue 6 Oct 06 Technical Reference Manual 2.3
SEMI Labelling The following table displays the SEMI labelling that may be applied to the
machine:
WARNING: STRONG MAGNETIC FIELD
A strong magnetic field exists in the vicinity of the camera linear motors.
These may represent a hazard to personnel or equipment.
WARNING: STRONG MAGNETIC FIELD
A strong magnetic field exists in the vicinity of the camera linear motors.
These may represent a serious hazard to people fitted with a pacemaker.
WARNING: STRONG MAGNETIC FIELD
A strong magnetic field exists in the vicinity of the camera linear motors
that represent a serious hazard to people fitted with metallic implants.
WARNING: STRONG MAGNETIC FIELD
A strong magnetic field exists in the vicinity of the camera linear motors
that may act upon ferrous objects whose movements could lead to per-
sonal injury and/or damage to the machine.
Warning Definition
Warning Definition Location
MOVING MECHANICAL PARTS
Removing this cover exposes moving
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before remov-
ing this cover. Refer to the Lockout
procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the front
of this chapter for a list of all warnings
and their definitions.
Left Hand Upper Side
Panel
WARNING
Part No. 185499Part No. 185499
Moving Mechanical PartsMoving
Mechanical Parts
Removing covers could result
in serious injury
Removing
covers could result
in
serious injury
Disconnect and lock out system power
before servicing refer to the
Technical Reference manual
Disconnect
and lock out system power
before
servicing refer to the
Technical
Reference manual