DS-Select-Cure-UV-9-NordsonASYMTEK (1).pdf - 第3页

Page 3 of 3 Select Cu re ® UV- 9 Cure Oven Select Cure UV - 9 Cur e Oven in line with a Nordson ASY MTEK SL - 940 c oating s ystem Software i nterface for Select Cure UV - 9 Cur e Oven Nords on AS YMTE K +1.760.431.1919 …

Page 1 of 3

Select Cure

UV-9 Cure Oven

For Conformal Coating Applications

Nordson ASYMTEK’s Select Cure UV-9 inline oven

is ideal for top and bottom material curing in mid- to

high-volume production environments. Using

ultraviolet light as the primary curing method, the

oven is optimized to cure parts up to 420 mm in size.

The heart of the UV-9 cure system is in the arc lamp

technology with adjustable UV intensity. It is

combined with a unique ventilation design that

dissipates heat generated from the UV lamp. This

combination keeps the temperature and rate of rise at

acceptable levels while maximizing production and

lamp lifetime as the lamps run cooler.

An optional closed-loop feature ensures process

reliability and compensates for the eventual lamp

degradation by measuring and adjusting power levels

for UVA. Therefore, the desired profile is maintained

within +/- 5% of the programmed specifications.

Other options and lamp types are available to further

ensure that the oven meets customer specific needs

while maintaining high performance. The design

features one oversized lamp that spans the entire

width of the oven which produces a uniform intensity

profile across the part. Three lamp modules are

available: 420 mm (120W/cm); 220 mm (140W/cm);

and 220 mm High Power (200W/cm).

Additionally a standard SMEMA-compatible chain

conveyor with 5-mm pins enables the processing of

boards and is easily integrated with any dispensing or

coating system. The conveyor can be configured for

either left-to-right and right-to-left flow with electical

width adjustment.

Arc Lamp 505 mm

Focal Length 100 mm (3.94 in.) standard

Length

(board width)

Optimized for 420 mm (16.5 in.)

Power 100 W/cm (254 W/inch)

Lamp Options

•

Standard = Mercury-doped lamp

(optimized for UVC)

• Mercury-Iron (rich in UVA)

• Mercury-Gallium (broadband

output along all wavelengths)

•

Others available upon request

Features and Benefits



Oversized lamp ensures uniform intensity

profile



Adjustable power levels



Runs cooler to extend the life of electronic

components



Will not interfere with wireless networks



Low maintenance and easy to operate



Optional top and bottom side curing of

materials up to 420 mm (16.5 in.)



Optional closed-loop monitoring of lamp

power to ensure consistent curing



Software tracking of lamp life – through the

Select Coat

SL-940 conformal coating

system

Page 2 of 3

Select Cure

UV-9 Cure Oven Specifications

General

Dimensions: 1400 x 1200 x 1526 mm

(55.12 x 47.24 x 60.1 in.)

2086 mm (82.13 in.)

including beacon

Noise level: 68 dB @ 1 m

Light Tower

3-Light Configuration with buzzer

Red: Alarm

Orange solid: Oven not ready (start-up,

cooling down, downstream

SMEMA no ready etc.)

Green flashing: Lamp in stand-by mode, but ready

for production pending

on up-stream SMEMA

Green solid: Run

Conveyor

Type: Chain conveyor with 5-mm pins

Component clearance: 100 mm top and bottom

Conveyor height: 920 to 1000 mm

(36.22 to 39.37 in.)

Conveyor speed: 300 to 1500 mm/min

(1-4.92 ft/min)

Conveyor width: 50 to 420 mm (1.97 to 16.54 in.)

Conveyor length: 1400 mm (55.12 in.)

Maximum load: 4Kg/m (2.69 lbs/ft)

evenly distributed

Exhaust/Ventilation

10.83 m3/min @ 40 mm WC, 250 mm exhaust duct

(382.5 SCFM @ 1.57 in. WC, 10 in. exhaust duct)

Facilities Requirements

Weight: 250 kg (551 lbs) (approximate)

Power: 400VAC 3 phases

Single sided

Double sided

Voltage

400 V AC

Phases

Mode

N+EARTH, TT

or TN

N+EARTH, TT

or TN

Power rating

7.5 KW

14 KW

Note: other power configurations available.

Air supply (for shutters): 5 bars (73 psi) max.

Other Standard Features

Integrated operator interface on coating or dispensing system

Software-controlled conveyor width adjustment

Light beacon

Exhaust control

Door and safety interlocks

E-stop

SMEMA compatible conveyor

Options

Close-loop UVA lamp regulation

Traffic control

Board counter

Board jam detection (entry and exit)

Automatic width adjust for conveyors

Right to left conveyor direction

Heavy-duty conveyor:

8Kg/m (

5.38 lbs/ft) evenly distributed

Reduces maximum conveyor width to 400 mm (1.3 ft)

Traceability software

Entrance conveyor covered extension

Exit conveyor covered extension

Recipes and data log storage

Touch screen for oven monitoring and control

Special paint

Dual-lane conveyor

Iron-doped lamp

Gallium-doped lamp

Power packs for different power configurations

Inlet and outlet shutters (air supply required)

220 mm lamp (140W/cm)

220 mm lamp (200W/cm)

Additional options are available: contact Nordson ASYMTEK

for further information.

Page 3 of 3

Select Cure

UV-9 Cure Oven

Select Cure UV-9 Cure Oven in line with a

Nordson ASYMTEK SL-940 coating system

Software interface for Select Cure UV-9 Cure Oven

Nordson ASYMTEK

+1.760.431.1919

2747 Loker Avenue West

Carlsbad, CA USA 92010-6603

Published 2018-03-21 Updated

For more information,

visit our website to

locate your local

representative or

contact your regional

office:

nordsonasymtek.com

info@nordsonasymtek.com

North America

Headquarters

Carlsbad, CA

China

Shanghai

Beijing

Guangzhou

Taipei

EMEA

Deurne, Netherlands

S.E. Asia/Australia

Singapore

Korea

Seoul

Japan

Tokyo

India

Chennai