MiniBlue II Slim Applicator Data Sheet PKL-13-5819_EN_Jan2023.pdf - 第2页
Nordson Corpor ation 11475 Lakeeld Drive Duluth, GA 30097-1511 (800) 683-2314 www.nordsonadhesive. com MiniBlue ® II Hot Melt Dispensing Applicators PKL -13-5819 Issued 1/23 © 2023 Nordson Corporation All Rights Reserve…
MiniBlue
®
II
Hot Melt Dispensing Applicators
Features
n Two interchangeable module technologies are available for
MiniBlue II applicators:
- Enhanced ball-and-seat (BAS) design for excellent cutoff in
the MiniBlue II BAS module
- Patented, self-cleaning, integrated needle and reduced cavity
in the MiniBlue II SureBead module
n Both module types incorporate patented Reflex™ seal
technology for superior life
n MiniBlue II BAS modules accept easily removable Nordson
Saturn nozzles
n MiniBlue II SureBead modules are available in sizes ranging from
.008 in. to .040 in. for maximum application flexibility
n MiniBlue II applicators are available in the following formats:
- Compact, energy efficient single-module slim line
- Single module and configurable standard body
- Direct fit retrofit for Best Choice™ SolidBlue® S and
SolidBlue A applicators
- Multi-module Low-Profile (BAS module only)
n Engineered, high-temperature plastic insulating covers are
standard on MiniBlue II slim line applicators
n All applicators include Saturn® filters
n Water-wash versions are also available
Benefits
n Module and solenoid combination reduces the performance gap
between pneumatic and electric applicators
n Longest operating life of any pneumatic applicator in the
packaging industry; reduces replacement frequency and cost
n Fast cycle times and superior high-speed performance
n Stronger air-open/air-close force promotes sharp cutoff, cleaner
adhesive patterns and high-speed operation
n Enables savings using intermittent bead dispensing
n Reduces energy use up to 38 percent and improves safety by
minimizing exposure to hot surfaces
n Virtually eliminates nozzle clogging, minimizing downtime and
maintenance with MiniBlue II SureBead module
Industry-best service life and
performance combine with application
flexibility to increase productivity and
lower operating costs
MiniBlue II standard
body applicator
MiniBlue II low-profile
(LP) applicator
MiniBlue II Slim applicator
MiniBlue II applicators set the industry standard for service life, speed, reliability and performance, reducing maintenance and downtime.
Nordson Corporation
11475 Lakeeld Drive
Duluth, GA 30097-1511
(800) 683-2314
www.nordsonadhesive.com
MiniBlue
®
II Hot Melt Dispensing Applicators
PKL-13-5819
Issued 1/23
© 2023 Nordson Corporation
All Rights Reserved.
Printed in U.S.A.
Nordson reserves the right to make
design changes between printings.
For more
information,
speak with your
Nordson
representative
or contact
your Nordson regional
office.
United States
Duluth, Georgia
(800) 683-2314 Phone
(866) 667-3329 Fax
Canada
Markham, Ontario
(800) 463-3200 Phone
(905) 475-8821 Fax
Europe
Erkrath, Germany
(49) 211-9205-0 Phone
(49) 211-254658 Fax
Japan
Tokyo, Japan
(81) 3-5762-2700 Phone
(81) 3-5762-2701 Fax
Asia/Australia/
Latin America
Amherst, Ohio
(440) 985-4797 Phone
(440) 985-1096 Fax
Find us on:
Specifications
Operating 205º C (400º F) maximum
Temperature
Operating 3.4 to 5.5 bar (50 to 80 psi)
Air Pressure
Working 103 bar (1500 psi) maximum
Hydraulic
Pressure
Nozzles Saturn, single orifice
Standard (controlled engagements)
Nozzles .008, .012, .016, .020, .032,
MiniBlue II .040
SureBead
Orifice Sizes
Saturn 24 VDC, high-temperature,
Solenoid factory-installed
Valves
Electrical 240 VAC, 50/60 Hz;
Service 200 VAC, 50/60 Hz optional
Maximum 8000/min
Cycle Rate
Minimum 2ms (adhesive dependent)
Bead
Deposition
Adhesive 500 to 1500 cps optimal
Viscosity 500 to > 5000 cps capability
Range
MiniBlue II low-profile applicator with Saturn SP solenoid
MiniBlue II standard body applicators (single module and
configurable) with 3 options:
• Original MiniBlue II applicator
• Retrofit for Best Choice SolidBlue S
*
• Retrofit for Best Choice SolidBlue A
*
MiniBlue II Slim applicators (with and without insulating
covers) and Saturn SP solenoid
*
Retrofits match bracket-to-nozzle dimensiuons from Best Choice applicators