P-249-005e.pdf - 第5页
MODEL CD-G100,G50 0909-003 目 次 CONTENTS コプラナリティチェックユニット CD-G100 Coplanarity Check Unit CD-G100 Fig. LE CD-G100 機構部 CD-G100 MECHANICAL SECTION Fig. LE-1 機構部 Mechanical Section Fig. LF CD-G100 電装部 CD-G100 ELECTRICAL SECTIO…
MODEL CD-G100,G50
1012-004
2
USING YOUR EXPLODED ILLUSTRATION
This Exploded Illustration shows the information about the parts of Coplanarity Check
Unit CD-G100,G50 for GXH Series and is made for Parts Ordering.
You must not replace a part with a new one according to only the information of this
Exploded Illustration.
1. Inquiring
For identification of each part, numbers are placed on illustration pages. These
numbers (Key No.) again appear in the far left column of the part table joined up
with the illustration.
The number shown in the Q’ty column of the part table represents the quantity of
certain part used in the equipment. In case of unit assembly, however, the number
represents the quantity of certain part contained in single unit.
2. Parts Ordering
For ordering parts, some parts might not be supplied as a single item, due to the
constitution of such parts.
When ordering parts, be sure to inform us of the following details:
Model Type
Serial No.
Fig. No.
Key No.
PART No.
PART NAME
Quantity
[Example]
3. Miscellaneous
This Exploded Illustration is subject to change without prior notice.
All rights reserved. No part of this work covered by the copyrights hereon may be
reproduced or copied without written permission of the publisher.
'' NOTE '' is used to show the notice that is not directly related to safety.
Some of the parts shown in the Exploded Illustration could fall into the scope of your
government’s regulations on strategic products. In that case, anybody who intend to
export the product should acquire due authorization.
CD-G100
Model Type
123456S 7890
Serial No.
Key No.161
Key No.
6301340913
PART No.
Q'ty
1
Fig. No.
Fig. LF-2
PART NAME
P.C.B,MOUNT
MODEL CD-G100,G50
0909-003
目 次
CONTENTS
コプラナリティチェックユニット
CD-G100 Coplanarity Check Unit CD-G100
Fig. LE CD-G100
機構部
CD-G100 MECHANICAL SECTION
Fig. LE-1
機構部
Mechanical Section
Fig. LF CD-G100
電装部
CD-G100 ELECTRICAL
SECTIO
N
Fig. LF-1
コントローラ
Controler
Fig. LF-2
分配基板
Distribute P
.C.B.
コプラナリティチェックユニット
CD-G50 Coplanarity Check Unit CD-G50
Fig. LE
CD-G50
機構部
CD-G50 MECHANICAL
SECTIO
N
Fig. LE-1
機構部
Mechanical Section
Fig. LF CD-G50
電装部
CD-G50 ELECTRICAL
SECTION
Fig. LF-1
ボード
Board
Fig. LF-2
分配基板
Distribute P
.C.B.
（多段トレイフィーダ非搭載及び
(Case:Multi-Layer T
ray Feeder FP-G100
FP-G100
搭載の場合）
Not Installed and FP-G100 Used)
コプラナリティチェックユニット取付
Main Machine Modification(Left-Rear,Right-Front)
本体対応（左奥、右前）
For Attaching Coplanarity Check Unit
G -S052-01 G -S052-01
Fig. LE-2
ベース部
Base Section
Fig. D-1
部品認識部 -
部品認識カメラ
Recognition Section-Recognition Camera
コプラナリティチェックユニット取付
Main Machine Modification(Left-Front,Right-Rear)
本体対応（左前、右奥）
For Attaching Coplanarity Check Unit
G -S052-02 G -S052-02
Fig. LE-2
ベース部
Base Section
Fig. D-1
部品認識部 -
部品認識カメラ
Recognition Section-Recognition Camera
（多段トレイフィーダ
FP-G200
搭載の場合）
(Case:Multi-Layer Tray Feeder FP-G200
Used)
コプラナリティチェックユニット取付対応
Modification(Left-Rear,Right-Front)
（左奥、右前）
For Attaching Coplanarity Check Unit
G -S052-03
G -S052-03
Fig. LE-2
ベース部
Base Section
Fig. D-1
部品認識部 -
部品認識カメラ
Recognition Section-Recognition Camera
コプラナリティチェックユニット取付対応
Modification(Left-Front,Right-Rear)
（左前、右奥）
For Attaching Coplanarity Check Unit
G -S052-04
G -S052-04
Fig. LE-2
ベース部
Base Section
Fig. D-1
部品認識部 -
部品認識カメラ
Recognition Section-Recognition Camera
3
CONT-1
MODEL CD-G100
0702-003
4
For GXH-1
For GXH-1J
CD-G100
G-S052-01
CD-G100
CD-G100
G-S052-01
G-S052-02
コプラナリティチェックユニット
CD-G100
Coplanarity Check Unit CD-G100
（
多段トレイフィーダ非搭載及び
(Case:Multi-Layer Tray Feeder FP-G100
FP-G100
搭載の場合）
Not Installed and FP-G100 Used)