TDS_AirJet_954_CRD_ENG.pdf - 第2页

AirJet ® 954 CRD TECHNICAL DATA SHEET 2 www.dct.cleaning GENERAL INFORMATION The AirJet ® cleaning systems represent unique air- bubbling technology developed and manufactured by DCT. Air-bubbling technology machines are…

100%1 / 8
www.dct.cleaning
REFLOW and SOLDERING PARTS cleaning
CONFORMAL COATING removing
www.dct.cleaning
TECHNICAL DATA SHEET
AirJet
®
954 CRD
Piano
www.dct.cleaning
CHAMBER
CHAMBER
AirJet
®
954 CRD 
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The AirJet
®
cleaning systems represent unique air-
bubbling technology developed and manufactured
by DCT.
Air-bubbling technology machines are developed
for gentle yet highly effi cient maintenance cleaning
of re ow and wave soldering machines such
as soldering frames,  lters, heat exchangers, etc.
The AirJet
®
“Piano” can also be off ered for the removal
of conformal coatings. AirJet
®
cleaning systems are available
in several sizes and with diff erent levels of automation of the
cleaning process.
AirJet
®
954 CRD “Piano” including 100% closed loop with
processes of cleaning, rinsing, and drying technologies.
All processes are fully automated and take place in one
process chamber, under which 2 storage tanks are placed,
one with cleaning liquid and the other with rinsing liquid.
The operator places the parts to be cleaned in the
process chamber in the basket, and the cleaning system
automatically performs the cleaning, rinsing and drying
process.
AirJet
®
954 CRD “Piano” is designed for the maintenance
cleaning of re ow ovens and wave soldering machines or
to remove cured conformal coating from coating frames,
coating machine parts or coated PBCs for repair and
subsequent coating.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
AirJet
®
954 CRD 
TECHNICAL DATA SHEET
3
www.dct.cleaning
C
CLEANING
RINSING
DRYING
R
D
Application
name
Recommended
application
Recommended
temperature
Total cleaning
process time
Capacity
per 8 hours
Reow and soldering parts
30 – 50°C 86 – 122 °F 45 min. 144 **
Conformal coating removing 40 – 55°C 103 – 131°F 45 min. 980* / 144 ***
3 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND:
R
D
C