QX150-8022888-REV_D.pdf - 第2页

Inspec t ‘ An ything ’ CyberOptics ’ AI 2 (A utonomous Image Interpretation) technology is designed for both lo w volume high mix, and high volume low mix Applications , and builds on the proven success of our Statistica…

100%1 / 2
QX150™ 2D AOI
Contact CyberOptics today for more information
+1 800.366.9131 or +1 763.542.5000 | CSsales@cyberoptics.com | www.cyberoptics.com
Copyright © 2015-2020. CyberOptics Corporation. All rights reserved. Specications subject to change without notice. 8022888 Rev D
QX150
™
2D AOI
Tabletop with In-Line Performance
Inspection Capabilities QX150 QX150-M
Inspection Speed 200 cm
2
/sec (31 in.
2
/sec)
Minimum Component Size 0402 mm (01005 in.)
Board Length 50 mm to 330 mm (2.0 to 13.0 in.) 50 mm to 510 mm (2.0 to 20.0 in.)
Board Width 50 mm to 320 mm (2.0 to 12.5 in.) 50 mm to 320 mm (2.0 to 12.5 in.)
Component Height Clearance 35mm
Lead Pitch 0.3 mm
Component Types Inspected Standard SMT (chips, J-lead, gull-wing, BGA, etc.), through-hole, odd-form, clips, connectors, header
pins, and more
Component Defects
Missing, polarity, tombstone, billboard, ipped, wrong part, gross body and lead damage, and more
Solder Joint Defects Solder bridge, opens, lifted leads, wettability, excess and insucient solder, debris, and more
Other Defects Gold-nger contamination, pin-in-hole, bent pins, debris, and many others
Component Measurement
Categories
Component X, Y position and Rotation
Vision System & Technology
Imagers 80 Megapixel Sensor
Image Transfer Protocol PCIe
Lighting Strobe White Light (with dark/bright eld)
Resolution 12 μm pixel size
Image Processing Statistical Appearance Modeling (SAM™ ) Technology.
Option: Autonomous Image Interpretation (AI²) Technology
Programming Simple online or oine
CAD Import
Any column separated text le with ref designator, XY, Angle, Part no info; Valor process preparation
System Specications
Machine Interface SMEMA, RS232 and Ethernet
Power Requirements 100-120 VAC or 220-240 VAC, 50/60Hz, 2 amp max.
System Dimensions (W x D x H) 867 x 756 x 622 mm 1250 x 756 x 622 mm
Weight ≈ 65 kg (143.3 lbs.) ≈ 130 kg (287 lbs.)
Options
Barcode Reader, Rework station, SPC Software, Alignment Target, Light Curtain Sensor
Ideal for
high-mix, low volume
environment
Inspect ‘Anything’
CyberOptics’ AI
2
(Autonomous Image Interpretation) technology
is designed for both low volume high mix, and high volume
low mix Applications, and builds on the proven success of our
Statistical Appearance Modeling technology. AI
2
is all about
keeping it simple - no parameters to adjust or algorithms to tune.
And, you don’t need to anticipate defects or pre-dene variance
either – AI
2
does it all for you.
Just draw a box, show a few good examples and you are
ready to inspect just about anything. Simply add good
examples to the Ai
2
model and the false call rates reduce
signicantly providing a very robust inspection solution.
QX150
™
All-New SIM with Enhanced Illumination
The QX150
TM
is powered by an all-new SIM (Strobed Inspection
Module) with enhanced illumination - designed to deliver true,
in-line inspection performance. The SIM enables on-the-y
inspection making the QX150
TM
the fastest tabletop ever at
150 cm
2
/sec.
A higher sensor resolution (12 µm) oers crisp and clear images for
more accurate defect review. And, as always, the SIM is
calibration-free.
AI - Faster, Simpler, and Smarter
With AI
2
technology, programming gets even faster – with a 90%
reduction in examples required to create a complete production ready
programme – you will achieve superior defect detection and low false
call rates even with just one example. This means signicantly lower
tuning time and quality results with one panel inspection. Perfect for
those high-mix or low volume applications!
With its unique ability to ‘ignore’ bad examples in a model, AI
2
oers
precise discrimination even with excessive variance and minimizes
eects of outlier examples. Plus, it is a lot simpler with full support for
unsupervised and semi-automatic model training. And, examples are
pre-sorted so you can select and clear the ones you don’t need – very
quickly. The pixel marking feature highlights defective spots, so you
can identify genuine defects instantly.
Fast, Scalable SPC Solution
CyberReport
TM
oers full-edged machine-level to
factory-level SPC capability with powerful historical
analysis and reporting tools delivering complete
traceability for process verication and yield
improvement. CyberReport
TM
is easy to setup and
simple to use while providing fast charting with a
compact database size.
Factory-level SPC
Line-level SPC
Machine-level SPC
Yield
AI
2
Software:
Unique Image Processing Technique
Components Inspected/ Detected
SIM (Strobe Inspection Module)
Intelligent Ranking of Examples
Active Pixel Marking
3-Easy-Steps Programming
Our latest software improvements take programming
to a whole, new level – zero to production ready in less
than 13 minutes! All this is made possible, with an
all-new data-rich, pre-loaded library and automated
scripts that collect examples and update models – all
on their own.
01005 component size inspection
capaility
CYBERREPORT
SPISOFTWARE
AOISOFTWARE
CYBERREPORT
CYBERCMM
SPISOFTWARE
AOISOFTWARE
CYBERCMM
CYBER
PRINTOPTIMIZER
CYBER
PRINTOPTIMIZER
CYBERREPORT
SPISOFTWARE
AOISOFTWARE
CYBERREPORT
CYBERCMM
SPISOFTWARE
AOISOFTWARE
CYBERCMM
CYBER
PRINTOPTIMIZER
CYBER
PRINTOPTIMIZER