AD-ISX-A6-F 系列英文使用说明书.pdf - 第2页

Shenzhen Jieneng Hui Lighting C o., Ltd. ———— Professional projection solution provider Shenzhen Jieneng Hui Lighting Co., Ltd. TEL：0755-27607939 FAX： 0755-27607939-803 2 IV、Ins talla tion ins truct ions： Caution : To en…

100%1 / 3
Shenzhen Jieneng Hui Lighting Co., Ltd.
————
Professional projection solution provider
Shenzhen Jieneng Hui Lighting Co., Ltd.
TEL：0755-27607939 FAX： 0755-27607939-803
1
Industrial Projection Light
Company Address: 2nd Floor, Building 4, Wanjun Technology Park, No. 14
Chuangye Road, Shilong Community, Shiyan Street, Bao'an District, Shenzhen
City, Guangdong Province
Phone: (86)-0755-27607939/400-8518-298
Official website: www.jnhled.com Email: 1105992549@ qq.com
Thank you for choosing our company's products. Please read the manual
carefully before installation and use, and install the product according
to the instructions. If you have any questions, please contact our technical
personnel.
IMain structure and scope of application：
1．The lamp housing is made of high-quality aluminum-magnesium alloy through
extrusion molding and then processed by high-precision CNC lathes,
featuring a sturdy and reliable structural design.
2、360-degree adjustable from all angles, easy to install. Comes with a remote
control, allowing effortless switching between static and rotating
patterns.
3 、 Military-grade optical imaging lens, composed of 6 K9 broadband
yellow-green coated HD lenses, capable of 4K high-definition imaging with
adjustable imaging size and distance, holding a national invention patent
(Patent No.: ZL 2014 3 0368176.3).
4、Supports non-standard customized large spot, with a maximum beam angle
of 63 degrees. The pattern supports trapezoidal correction, with a maximum
elevation angle of ±75 degrees.
5、The lighting fixture, while fully considering the heat dissipation of
the housing itself, incorporates dual copper tube heat conduction, forced
air cooling, and Peltier effect multi-mode heat dissipation to achieve
more efficient, safe, and reliable cooling.
6、The light source of the fixture adopts imported OSRAM LED chips, with
≤3% lumen depreciation over 3 years and a lifespan of ≥60,000 hours.
7、The driving power supply adopts internationally branded constant-current
digital power supplies, featuring constant power output,
infrared-programmable adjustable output current, automatic voltage
adaptation, and multiple protection functions including short-circuit,
over-voltage, and over-temperature, with configurable output modes.
8、The lamp structure is simple and elegant, easy to install, and can be
widely used in restaurant ambiance, underground parking lots, storefronts,
signage indicators, indoor advertising, and other venues.
II、Product parameters：
Product model
Input voltage
Input current
Power (W)
AD-IT16-A6-F
100-240Vac
0.2A/230VAC
16W
AD-IT20-A6-F
100-240Vac
0.2A/230VAC
20W
AD-IT25-A6-F
100-240Vac
0.2A/230VAC
25W
AD-IT35-A6-F
100-240Vac
0.2A/230VAC
35W
AD-IT45-A6-F
100-240Vac
0.2A/230VAC
45W
III、Product appearance dimensions and structural diagrams （16-45W
dimensions may have slight variations. For details, please consult relevant sales personnel. ）
Shenzhen Jieneng Hui Lighting Co., Ltd.
————
Professional projection solution provider
Shenzhen Jieneng Hui Lighting Co., Ltd.
TEL：0755-27607939 FAX： 0755-27607939-803
2
IV、Installation instructions：
Caution: To ensure device safety, please follow the operating instructions
and place it in a secure location.
1、Unpack the product and take out the lamp, carefully read the instructions
and labels, connect the power supply to confirm whether the lamp is working
properly, pay special attention to whether the cooling fan is functioning
normally. If there is any foreign object stuck, please remove it promptly
to ensure the cooling fan operates properly, otherwise it will affect the
normal lifespan of the lamp!
2、Prepare the installation tools and follow the steps below to correctly
install and debug.：
2.1 Disconnect the power supply of the luminaire to ensure personnel safety.
2.2 On the mounting surface, secure the luminaire to the mounting surface
with four M4 screws, as shown in Figure 1:
2.3 Connect the wire to the input line of the luminaire, turn on the power
switch to energize (ensure the luminaire wiring is correct).
2.4 Adjust the projection angle of the luminaire to the desired position,
then tighten the fixing screws and the vertical locking screws to secure
the projection angle. As shown in the figures: Figure 2 illustrates loosening
the screws, Figure 3 demonstrates fixing the angle.
2.5 Pattern clarity adjustment: First, unscrew the waterproof pressure ring
counterclockwise by hand (as shown in Figure 4); then, turn the optical
adjustment lens counterclockwise to extend it (as shown in Figure 5). As
the pattern gradually transitions from initial blurriness to increasing
clarity (Note: Due to the high precision and extended length of the lens
threads, this process may take 1-2 minutes), fine-tune the focus by rotating
the adjustment lens clockwise or counterclockwise until the pattern/logo
achieves optimal sharpness (as shown in Figure 6).
2.6 After adjusting the pattern/LOGO to the desired position, manually
tighten the waterproof compression ring in reverse direction until fully
compressed (as shown in Figure 8).
2.7 Check whether all screws of the lamp are tightened and secure, whether
the waterproof treatment of the wiring ports is done properly, and whether
the entire lamp installation is completed.
Shenzhen Jieneng Hui Lighting Co., Ltd.
————
Professional projection solution provider
Shenzhen Jieneng Hui Lighting Co., Ltd.
TEL：0755-27607939 FAX： 0755-27607939-803
3
V、Precautions：
1、When the luminaire is powered on, please ensure the cooling fan operates
normally to prevent a reduction in the luminaire's lifespan.
2、If the projected image is unclear, please adjust the front lens of the
fixture to ensure the image reaches a clear state.
3、After adjusting the pattern to be clear, be sure to tighten the waterproof
compression ring at the rear of the front lens to meet the corresponding
waterproof requirements.
4、Due to the special nature of electrical appliances, non-professionals
should not disassemble the luminaire without authorization. Do not use it
in poorly ventilated or dusty/smoky environments to avoid overheating of
the luminaire or reduced lens clarity.
5、Please do not modify, add, or replace parts of the product on your own
to avoid reducing the lifespan and safety of the lamp.
6、This product is a focused optical lighting fixture. Please ensure there
is at least 100MM of ventilation around the product, with a minimum distance
of 1 meter between the fixture and the illuminated surface. Under no
circumstances should the fixture be covered with thermal insulation padding
or similar materials, as this may cause fire or malfunction.
7、When the product is abnormal, please immediately cut off the power supply
and have it inspected and repaired by qualified professionals to avoid fire,
falling, or injury.
VI、Maintenance：
For safe and efficient use of this product, please clean and inspect it
regularly (every 6 months is optimal). Do not wipe with gasoline, thinner,
etc., to avoid discoloration or paint peeling. Every 3-5 years, have a
professional inspect it and replace any damaged or substandard parts.
warranty card
The user has a two-year warranty and lifetime maintenance during normal use
of this product, and human error, improper operation, and natural disasters
are not covered by the warranty. If the warranty period or scope is exceeded,
maintenance fees for the parts will be charged. When repairing, please send
the warranty card and certificate of conformity together with the equipment
to the manufacturer!
product name：
Product model：
Defects liability
period：
user name：
address：
corporate name：