AP130_A_MANUAL.pdf - 第2页
To o l Car tridge Stand Control Units CF DI DDE DME A P 13 0 - A C13 0 AP- SD Packing List The following items should be included: So lde r fee d iro n ................ 1 u R e f . A P 13 0 - A Ø1 mm Fee der tu be (9 0 m…
Solder Feed Iron
Ref. AP130-A
www.jbctools.com
Tool Cartridge Stand
Control Units
CF
DI DDE DME
AP130-A C130 AP-SD
Packing List
The following items should be included:
Solder feed iron ................ 1 u
Ref. AP130-A
Ø1 mm Feeder tube (90 mm length)
(Ref. 0006558) is included
Reel .................................. 1 unit
Ref. 0002801
Ø1 mm Feeder tube
(95 mm length) .................. 1 u
Ref. 0006559
Manual ............................ 1 unit
Ref. 0008861
Solder Feed Iron
Ref. AP130-A
Compatibility
The AP130-A solder feed iron is fully compatible with any JBC station of the Modular Line and with
the CF Solder Feed station of the Compact Line.
2
www.jbctools.com
Align the tip of the cartridge with the feeder
tube. Use a PLR195 or a flat-nosed pliers for a
safe tip alignment.
Do not over-tighten the cartridge.
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off and wait until the tool temperature
drops to room temperature before following these guidelines:
Loosen the screw and remove the cartridge.
Use a flat pliers if still hot.
1. Removing
Alignment
Important: Tighten the screw again. This is
necessary for a proper connection.
2. Inserting
3. Aligning 4. Fixing
Mark
Important: Insert the cartridge as far as
the mark for a correct connection.
www.jbctools.com
3