LC1D80Q7C SOP .pdf - 第2页
2/11 CH01057 Instruction Sheet LC1D40~95...C 产品合格证 12 HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH p Disconnect all power before servicing equipment. p Do not operate the contactor manually. p Do not remove the conta…
1/11
CH01057
Instruction Sheet LC1D40~95...C
产品合格证
12
上海市普陀区绥德路629路，邮编：200331
No. 629, Suide Road, Putuo District, Shanghai 200331
本产品经检验，符合标准IEC60947/GB/T14048/GB21518
准予出厂。
On inspection, this product is in accordance with standard
IEC60947/GB/T14048/GB21518 and permitted to leave the
factory.
上海施耐德工业控制有限公司
Schneider Shanghai Industrial Control Co., Ltd
产品合格证
Product certificate
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F - 92500 Rueil Malmaison Cedex
www.se.com
2/11
CH01057
Instruction Sheet LC1D40~95...C
产品合格证
12
HAZARD OF ELECTRIC SHOCK,
EXPLOSION OR ARC FLASH
p
Disconnect all power before servicing
equipment.
p
Do not operate the contactor manually.
p
Do not remove the contactor’s side panels.
Failure to follow these instructions will
result in death or serious injury.
危险
/ DANGER
RISK OF FIRE OR ELECTRIC SHOCK
p
The opening of the branch-circuit protective
device may be an indication that a fault current
has been interrupted.
p
To reduce the risk of fire or electric shock,
current-carrying parts and the other
components of the controller should be
examined and replaced if damaged.
Failure to follow these instructions can
result in death, serious injury, or
equipment damage.
警告
/
WARNING
可能有引起火灾或触电的危险
p
支路保护设备断开，可能表示故障电流已中断。
p
如要降低起火或触电风险，应检查控制器的
载流部件或其他部件，如有损坏，应予以更换。
不遵循上述说明可能导致人员伤亡或设备损坏。
电击、爆炸或电弧闪光危险
p
在此电力设备上进行工作时,请先切断所有电源。
p
请勿用手操作接触器。
p
请勿去掉接触器的侧板。
不遵循上述说明将导致人员伤亡。
产品型号
能效等级
产品合格证
12
3/11