TP2492.Parts Set Pos Quantity Arrangement.pdf - 第2页

  SMT Software Engineering Group IM Operati ons YAMAHA MOTOR CO., LTD. MDO C-SOFT502 34  2/18  Rev V ersion Chapter Revised Contents 00 V3.32 STD R1.000 or later / P-T oo l V1.32 ST D R1.000 or later All Cr…

100%1 / 18
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 1/18
Parts Set Pos Quantity Arrangement
Contents
Parts Set Pos Quantity Arrangement ..................................................................................................... 1
Contents ..................................................................................................................................................... 1
1 Applicable models and software versions .......................................................................................... 3
2 Outline ..................................................................................................................................................... 3
3 Restrictions ............................................................................................................................................. 3
4 Detail........................................................................................................................................................ 4
4.1 Function in optimization ................................................................................................................. 4
4.1.1 Set parts to plural set position in the lane............................................................................ 4
4.1.2 Function of Lane Divide.......................................................................................................... 4
4.2 Detail Settings ................................................................................................................................. 5
4.2.1 Optimizer Setting..................................................................................................................... 5
~ Variation of “Exec Option” ~......................................................................................................... 6
4.2.2 Setting of “parts set pos quantity by same parts”(*5,*6).................................................... 7
4.2.2.1
The way to display the setting
................................................................................ 8
4.2.2.2
The way to add the setting
.................................................................................... 10
4.2.2.3
The way to change the setting
............................................................................. 14
4.2.2.4
The way to delete the setting
................................................................................ 15
4.2.2.5
Other Operation
........................................................................................................ 16
4.3 Change layout in “Set optimization parameters” ..................................................................... 17
4.4 Restrictions.................................................................................................................................... 18
The information contained in this message may be co
nfidential and legally protected under applicable l
aw. The
message is intended solely for the addressee(s).
If you are not the intended recipient, you are hereby notified th
at anyuse, forwarding, dissemination, or reproducti
on
of this message is strictly prohibited and maybe unlawful.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 2/18
Rev
Version Chapter
Revised Contents
00 V3.32 STD R1.000 or later /
P-Tool V1.32 STD R1.000
or later
All Created
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 3/18
1 Applicable models and software versions
Applicable items and software version are shown as below.
Sheet 1. Applicable models and software version
Item Name Software Version Remarks
All series mounter
YFacT P-Tool
V3.32 STD R1.000 or later /
P-Tool V1.32 STD R1.000 or later
2 Outline
In the machines whose each head has restriction area for the board, there is a possibility
that “Mount Position Coordinate Errors” will occur. This function prevents some of the errors
by distributing plural feeders of the part. And this function succeeds “Lane Divide Prohibited
Part Setting” and its function in the Feeder Viewer (*1).
(*1) Feeder Viewer is the application of P-Tool of Yamaha Factory Tools.
3 Restrictions
・ There are combinations of the Optimizer Settings which are not available. Please see
Capture 4.4 for more detail.
・ “Setting of parts set pos quantity by same parts” is used in ALL LINES in common.
This setting can be set by same part.
・ Not all errors of “Mount Position Coordinate Errors” can be avoided by this function.
When the error will appear again after using this function, please check the machine
specification, Mount Data’s coordinates, the condition of Parts distribution, and
Machine Setting.