NeoHorizon 03iX SP Tech Spec.pdf - 第10页
10 DEK Neo Horizon 0 3 iX SP Machine P r oduct ivit y O pti ons Process Specification Print Metho d Paste Disp enser Paste Roll He ight Mo nitor Printing En vironment Control Temperatur e Control Module Recommended Stenc…
9
DEK NeoHorizon 03iX SP
Machine Standard Configuration
Services
Specification
Voltage
230 Volts ±10%. Single phase 50/60 Hz
Maximum Current at 230V
8 Amps with under stencil vacuum pump
5 Amps without under stencil vacuum pump
Over Current Protection
An external circuit breaker ≤20 Amps is required to be
fitted in line with the machine supply
Air Supply
To ISO 8573.1 Standard Quality Class 2.3.3
Pressure 5 bar to 8 bar
General usage 5 litres/minute at 5 bar to 8 bar
Maximum usage 226 litres/minute at 6 bar
Shipping Information
Specification
Approximate Weight
850kg boxed (dependent upon configured options
selected with machine)
690kg unboxed (dependent upon configured options
selected with machine)
Approximate Dimensions
2080mm x 1500mm x 1590mm High
(81.9” x 59” x 62.6”) Boxed
Certification
Specification
CE
98/37/EC
89/336/EEC
73/23/EEC
Subsequent amendments
Acoustic Noise Level
Less than 70dB 2003/1/EC
10
DEK NeoHorizon 03iX SP
Machine Productivity Options
Process
Specification
Print Method
Paste Dispenser
Paste Roll Height Monitor
Printing Environment Control
Temperature Control Module
Recommended Stencil Frame
VectorGuard
Adjustable Width Stencil Mount (AWSM)
Frame variants – Fully adjustable to accommodate
frame sizes in the range of 381mm to 736mm
(15” to 29”) by 38mm height.
Image position: Centre/Front/Custom
Under Stencil Cleaning
Typhoon Under Stencil Cleaner, fully programmable
with wet/dry/vacuum wipe with external solvent tank
Specify length (300mm, 400mm, 460mm, 515mm)*
Stencil Positioning
Automatic loading incorporating squeegee drip tray
* If configured with an AWSM, the cleaner chamber size should be matched with the minimum AWSM
width and stencil frame width being used
Handling & Cleaner Options
Specification
Substrate Handling Size (maximum)
620mm (X) x 508.5mm (Y) – Long Board Option
Under Stencil Cleaning
Typhoon Under Stencil Cleaner (620mm, poly blade
insert only)
Software & Communications
Specification
Substrate Handling
Selective print pass through
Software & Communications
GEM on TCP/IP
Statistical Process Control
On board, reported via operator interface (QC-CALC)
11
DEK NeoHorizon 03iX SP
Machine Productivity Options
Transport
Specification
Substrate Support
Vacuum tooling capability
Vacuum tooling sensor*
Vacuum cups*
Substrate Fixture
Snuggers (edge clamping)
* Only work with traditional vacuum source
Vision & Verfication
Specification
HawkEye® 750 Paste on Pad Verification
Enabled
HawkEye® 1700 Paste on Pad
Verification
Enabled (camera included)
HawkEye
HawkEye® Bridging (requires HawkEye® 1700
camera)
Data Capture
Specification
Product Data Capture
Verification & Traceability
ProDEK closed loop
Camera Barcode Reader