00198271-02_UM_ShuttleExtensionTX_EN.pdf - 第23页
Assembly and User Manual 2 Operational safety Shuttle Extension Edition 06/2017 2.1 Safety instructions 21 2.1.3.2 Safety of operators and other persons Machine operator s must only carry out work for which they have b…
2 Operational safety Assembly and User Manual
2.1 Safety instructions Shuttle Extension Edition 06/2017
20
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the installa
-
tion, setting up, operation and preventive maintenance of placement machines and add-on de
-
vices and are suitably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac
-
cordance with normal safety standards.
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
The operational safety of Shuttle Extension TX can be guaranteed only if the system is used
as prescribed and in accordance with the instructions in the user manuals.
Always follow any safety regulations specific to your country.
Make sure that the warning labels are always clearly identifiable and always easily readable.
Replace any damaged warning or notice labels. Replace any labels that are missing.
If it is necessary to work on the SIPLACE TX machine and you do not have adequately trained
personnel within your operation, always call in a ASM Assembly Systems GmbH&Co.KG
service engineer! ASM Assembly Systems GmbH&Co.KG will not accept liability for any
damage or consequential damage that is the result of unauthorized/incorrect work.
If particularly hazardous situations are identified while the SIPLACE TX and the Shuttle
Extension TX are in use, the machine owner must immediately notify the manufacturer in writ
-
ing so that appropriate action can be taken to reduce the potential danger.
Assembly and User Manual 2 Operational safety
Shuttle Extension Edition 06/2017 2.1 Safety instructions
21
2.1.3.2 Safety of operators and other persons
Machine operators must only carry out work for which they have been adequately trained and
with which they are totally familiar.
NEVER open one top lid if you are not totally familiar with the use and functioning of the ma
-
chine! Do not open the top lid during operation unless you are told to do so in this manual or
in the station software dialog.
For your own safety, wear work clothes that conform to the guidelines of the professional as
-
sociation or to the regulations of your country, i.e. safety shoes, hair net or no wide sleeves
etc.
Reduce the risks by not wearing scarves, chains or ties at your work post.
People with long hair must wear a protective head covering.
The Shuttle Extension TX may not come into contact with splashed or sprayed water or other
liquids. Cleaning with wet cloths is also prohibited. Cleaning may only be performed with dry
cloths.
2.1.3.3 Safety of plant and equipment
Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices.
2 Operational safety Assembly and User Manual
2.2 Warning labels Shuttle Extension Edition 06/2017
22
2.2 Warning labels
Fig. 2.2 - 1 Warning labels on the Shuttle Extension TX
External grounding point, item no. 00359574-xx
Item W 203, item no. 03009342-xx (on both sides)
Item W 204, item no. 03009343-xx (on both sides)
Item W 210, item no. 03009350-xx
(T) Direction of PCB transport (from SIPLACE TX)
W 203
W 210
W 204
External grounding
point