DECAN_S2_Maintenance(Eng_Ver4.3).pdf - 第7页
※ W arnings and cautions fo r safe ty ■ Cautions to be exercised for the safety and to be referr ed to for the work are described as follows in this manual. Dange r If the instructions following this symbol are not follo…
※ Warnings and cautions for safety
Safeguard override key
This is a key switch that can be operated artificially to prevent
the door switch from operating. It should be used limitedly only
when performing initial setting or maintenance of the machine.
Danger
The Safeguard override key switch must be used by the designated
responsible personnel. It must be carefully used for machine operation.
Failure to do so may result in death or serious personal injury if the
operator approached the drive with the safety cover Open.
ㆍ If the key is in ‘I’ direction (3 o’clock) Safeguard override function is turned On.
ㆍ If the key is in ‘O’ direction (12 o’clock) Safeguard override function is turned Off.
※ Warnings and cautions for safety
■ Cautions to be exercised for the safety and to be referred to for the work are
described as follows in this manual.
Danger
If the instructions following this symbol are not followed, serious accidents
could occur, or death or serious injury of the operator could happen. Be
sure to follow the instructions.
Warning
If the instructions following this symbol are not followed, serious accidents
could occur, or serious injury of the operator could happen. Be sure to
follow the instructions.
Caution
If the instructions following this symbol are not followed, damage of
machine hardware, software, and data could occur or the operator could
be injured. Be sure to follow the instructions.
The item according to this mark describes the item to which the user needs
to refer when performing the corresponding work.
※ Cautions to be exercised before using the machine
Warning
Cut off the pneumatic system and power supply before performing
maintenance and repair of the machine. Otherwise, personal injury or
death may occur. Hanwha Precision Machinery Co., Ltd. is not responsible
for problems caused by machine repairs performed in a manner not
mentioned in this manual, or any modifications carried out without prior
approval.
Caution
If you need an additional repair other than the maintenance work
mentioned in this manual, contact our C/S company (STS) or local agent
for proper measures.
※ Symbols for Work Instructions
■ This manual expresses safety related items to be kept in mind as well as
reference items for work as indicated by the following symbols:
Inspect
The remarks following this symbol refer to performing visual inspection of
foreign material, chip etc.
Clean
The remarks following this symbol refer to cleaning with cloth or brush.
Grease
The remarks following this symbol refer to injecting grease using a grease
gun.
Replace
The remarks following this symbol refer to replacing a part.
Apply
Grease
This symbol refers to applying grease using a brush.
