5OM-1075-002.pdf - 第4页
About the Instruction Manual V olume 5: Pneumatic and Electrical Diagrams This provides various kinds of material such as pneu- matic and electrical circuit diagrams for those who are in charge of machine servicing opera…
About the Instruction Manual
• This instruction manual is classified into several volumes on subjec-
tive basis as follows.
Volume 1: Operation (Operator)
This describes the fundamentals for those who read
this instruction manual and use the Multi-Functional
Mounter for the first time.
Coverage: This covers the checking items, the safety
precautions, the scope of the machine, the
preparatory and ending procedures of au-
tomatic operation, and the troubleshooting
on simple errors.
Volume 2: Operation (Supervisor)
This describes the general items related to machine
operations for those who have learned how to operate
the machine.
Coverage: This covers the specifications and func-
tions of the machine and various menus
related to the program change, automatic
operations, and maintenance, etc.
Volume 3: Programming and Machine Data
This describes various data for a programmer(s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the various data such as pat-
tern program, component library data, and
the menus for production control and sys-
tem settings.
Volume 4: Maintenance and Troubleshooting
This describes periodic maintenance operations,
troubleshooting, etc., for those who use this machine.
Coverage: This covers periodic maintenance opera-
tions, the list of consumables and servic-
ing parts, troubleshooting on simple errors,
and error messages and remedial mea-
sures against simple errors.
0206-003 2 AHB01EMTP
Fig. 5X2
Fig. 5X3
Fig. 5X4
Fig. 5X5
About the Instruction Manual
Volume 5: Pneumatic and Electrical Diagrams
This provides various kinds of material such as pneu-
matic and electrical circuit diagrams for those who are
in charge of machine servicing operations.
Coverage: Pneumatic Diagram, Parts Location, Elec-
trical Circuit Diagrams, etc.
COMPONENT LIBRARY:
This includes an explanation of component library data
and how to create it.
• This manual may not be copied, in whole or part, with-
out written consent of the publisher.
• This manual should be regarded as part of the ma-
chine and the contents comply with all the specifica-
tions regarding the purchased machine. Please keep
this manual within reach to serve as a handy tool in
completely understanding the workings of this ma-
chine.
• The contents of this manual are subject to change
without prior notice.
0206-002 3
AHB01EMTP
Fig. 5X7
Fig. 5X6
Contents
Page
Before Use .......................................................................................... 1
About the Instruction Manual ............................................................ 2
Contents .............................................................................................. 4
Checking Items.................................................................................... 7
Safety Precautions .............................................................................. 9
Section 1 Pneumatic Diagram
..........................................1- A
1. Pneumatic Diagram .....................................................................1- 1
Section 2 Parts Location
......................................................2- A
Plane View of Base Frame (F) .....................................................2- 1
Front Door View of Base Frame (F) ............................................2- 2
Right Side View of Base Frame (F) .............................................2- 3
KM/Q Panel View of Base Frame (F) ..........................................2- 4
Plane and Side Views of Base Frame (R) ..................................2- 5
Rear Door View of Base Frame (R).............................................2- 6
Location of Transformer Base Frame (R) ..................................2- 6-1
Layout of Front Operation Panel Section ..................................2- 7
Layout of Rear Operation Panel Section ...................................2- 8
Location of Work Lamps in Base Frame (U) ..............................2- 8-1
Whole Layout of Base Frame (U) ................................................2- 8-2
Plane and Side Views of Control Box ........................................2- 9
Board View of Control Box VME Rack ......................................2- 10
CM-5011 Fixed Recognition Camera
Minimum/Large Views (Option) .........................................2- 11
LG-5010 Lighting Unit (Option) ...................................................2- 12
Section 3 Location of Sensors and Loads
...............3- A
Layout of Sensors and Loads (Base Frame) .............................3- 1
Layout of Sensors and Loads (Beam (Y Axis)) ..........................3- 2
Layout of Sensors and Loads (Bearm (X Axis)) ......................... 3- 3
Layout of Sensors and Loads (Nozzle Stocker (B1)) ...............3- 4
Layout of Sensors and Loads (Nozzle Stocker (B2)) ...............3- 5
Layout of Sensors and Loads (Cover Section) ......................... 3- 6
Layout of Sensors and Loads (Head (L)) ...................................3- 7
Layout of Sensors and Loads (Head (R)) ...................................3- 8
Layout of Sensors and Loads
(Conveyor Section (Rear Reference)) .............................3- 9
Layout of Sensors and Loads (Backup Section) .......................3-10
0308-003 4 AHB01EMTP