DRAGF-CC-NX-UK_W.pdf - 第4页

Q UALITY THROUGH PROCESS CONTROL Rel iabl e fa ult det ecti on • Pai nti ng zon e ( are a) • Pai nt spl ash es to 100 µm (fu lly co ver ed) • Ide nti ﬁca tio n o f D MC / b arc ode on th e r evi ew pag e wit hou t a ddi …

Following the winning philosophy which characterized its business in testing over three decades, based on the constant

and rapid innovation of its testing solutions, Seica introduces the

Dragonfly

C C

NEXT>SERIES. This is

the

new generation of systems featuring a renovated and sleek look thanks to the premium materials of the chassis

and innovative worth discovering performances.

The

Dragonfly

C C

NEXT>SERIES ensures a quick and complete examination of all coated

assemblies. The combination of multi-colored LED lighting, UV-LED lighting with the color line scan camera enables

clear Laquer Inspection. The full-scan imaging of the PCB will ensure proper detection of faults. Compared to

manual inspection, the results of

Dragonfly

C C

NEXT>SERIES are not operator dependent, but

always objective and reproducible.

The inspection allows rapid feedback of process faults (closed-loop).

The test results are displayed for documented repair of the module at the

appropriate repair station. This results in time and cost savings as well as a

signiﬁcant increase in quality.

•

Dragonfly

C C

NEXT>SERIES saves time, space and money.

• The typical payback is eight to twelve months.

To receive a ﬂawless end product and at the same time reduce the costs for

quality control and on-going basis, inspection is required to make sure faults do

not arise.

AOI (Automatic Optical Inspection) allows an economical test of

various processes.

Automatic and manual fabrication steps can therefore be veriﬁed using many

diverse criteria. There is a demand for a ﬂexible solution; it should provide a test

with different requirements in mind and without an elaborate and complicated

test program process. The program generation can be done in minutes.

CONFORMAL COATING INSPECTION

Dragonfly

C C

NEXT>SERIES

Utilising

Dragonfly

C C

NEXT>SERIES

for conformal coating not only detects faults like missing

areas and splash contamination but also helps with

process control. Initial coating programs can be checked

and ﬁne-tuned to create uniform coating patterns with an

even thickness. Existing processes can be monitored for

changes during the production run. A blocked nozzle or

a material change can easily be spotted.

PROCESS OPTIMIZATION

In order to detect conformal coating defects, it is necessary

that the coating material has an UV trace. The product has to

illuminate with UV light and using the ﬂuorescent light for the

inspection.

Our solution use an High Power UV LED source to amplify

the response of applied product and have a better result in

testing.

INDUSTRY 4.0

Information, and the technology needed to collect and

analyze data to obtain it, is key to the successful

digitalization of the manufacturing process, which is at the

heart of the Industry 4.0 concept.

The

Dragonfly

C C

NEXT>SERIES line has

all of the capabilities needed for implementation in any

Factory 4.0 scenario, providing the possibility to plug in

any proprietary or third party information system to

achieve the desired goals.

All the

Dragonfly

C C

NEXT>SERIES

testers feature the Industrial Monitoring solution “4.0

ready” by Seica, to monitor current absorption, supply voltage,

temperature, light indicators and other parameters useful to

indicate the correct operation, to ensure predictive maintenance

and make the systems compatible with the new standards of the

fourth industrial revolution ongoing nowadays.

QUALITY THROUGH PROCESS CONTROL

Reliable fault detection

• Painting zone (area)

• Paint splashes to 100µm (fully covered)

• Identiﬁcation of DMC / barcode on the review page

without additional Reader

High inspection depth and large test facility

• High-resolution color scanner

• Multi-color LED lighting Plus UV lighting

• 24Bit Color, 14.040 x 20.400 Pixel per Scan

• Board size: small ver. 300mm x 400mm, large ver.

420mm x 540mm

• High speed: 25mm/Second

• Entire surface in parallax view

• Twin system for simultaneous inspection of both sides

of PCB’s TOP/BOTTOM

Clear operation

• Display the error position and representation of error

and comparison image

• Software (GUI) identical to the test system and repair

stations

• Fault is assigned by pressing a button statistics

• Easy to use and train

Statistics and Process Control

• Traceability by evaluating barcode / 2D code / RFID

• Cost savings because of quick process optimization

• Intuitive inspection plan

• Graphical interface

• Powerful and ﬂexible test algorithms

General features

• Power supply: 230V 50Hz 1Ph+N+G; 4 A

• Total External Dimensions:

1200 x 1071 x 1373mm (L x W x H)

• Weight: 560Kg

• SMEMA compatible

• MLD1200: fixed optical system, only mirrors and illumination

are moving, almost no wear.

• Low maintenance.

• MTBF = 1,300,000 Scans / UV Lights 5000 Hours.

• One-Pass-Scan: complete test of the board in one pass scan.

• Timing depend on board size between 6 and 25 sec.

Seica reserves the right to change any technical specification without notice

Brochure Dragonfly-CC Next series UK ver. 01 11/2017

PROXIMA S.R.L.

E-mail: info@proxima-ate.com

SEICA Inc.

E-mail: dave.sigillo@seicausa.com

SEICA FRANCE SARL

E-mail: dupoux@seica.fr

SEICA ELECTRONICS

(Suzhou) Co.Ltd.

E-mail: seicachina@seica.com

SEICA DEUTSCHLAND GmbH

E-mail: marc.schmuck@seica.com

SEICA SpA

via Kennedy 24

10019 Strambino - TO- ITALIA

Tel: +39 0125 6368.11

Fax: +39 0125 6368.99

E-mail: sales@seica.com

www.seica.com

SEICA

WORLDWIDE

GLOBAL SUPPORT NETWORK

Thanks to the global extension of Seica and its

subsidiaries, Seica can ensure local service

support wherever the customer needs it,

in addition to 24-hour telephone assistance.