TR7600 SIII_Operation_en_v_2_0_2.pdf - 第5页

Test Research, Inc . TR7600 SIII Ser ies User G uide – Op eration WARNING: Ris k of electric s hock and mechanical injur y. Only fully trained persons should be allow ed to take part in th e installation process. WARNING…

Test Research, Inc.

TR7600 SIII Series User Guide – Operation

Safety

Before starting the machine, personnel involved in the machine operation, maintenance or

service must understand and follow these points:

1) This machine is designed to automatically inspect PCBA via X-ray Scanning and

algorithms.

2) The machine must be operated by qualified personnel only. Qualified personnel should

meet the following qualifications:

 Have normal depth perception, field of vision, reaction time, manual dexterity,

coordination, and no tendency to dizziness.

 Completed operators training.

3) All personnel involved in machine operation must understand the use of the emergency

stop buttons.

4) Anyone operating this machine must obey the warning signs.

5) Ensure that all covers and shields are intact, mounted, and closed while the machine is

in operation.

6) Do not disable or disengage any safety switch or sensor.

Personal Safety Equipment

The correct operation of this machinery does not require any Personal Safety Equipment.

Physical Safety Hazards

1) Noise Level: The noise levels of the machinery are of <80dB with frequency between

20Hz - 20 kHz in accordance to Taiwan Noise Control Act, Article 4 (Noise control

standards for factory plants or sites - Class 4)

2) Radiation Level: For all X-ray inspection equipment manufactured by TRI, under normal

conditions the radiation dose at 5cm distance from any cabinet outer wall should not

exceed 0.5µSv/h.

Note: Before operating the AXI machine, please ensure that you have read and

understand the Health and Safety Manual.

Test Research, Inc.

TR7600 SIII Series User Guide – Operation

WARNING: Risk of electric shock and mechanical injury. Only fully

trained persons should be allowed to take part in the installation

process.

WARNING: Do not reach in the machine when it is operating.

WARNING: When TRI created the test system software CD, it contained

no known viruses. The software on the TRI CD was checked by the

latest anti-virus software before being copied to the disk. Customers

should use a good, up-to-date virus checker on this TRI software, and

any other file you import from an outside source before using the

software. Please also ensure your virus checker’s data files are up to

date.