RDS_UV_EN.pdf - 第4页
F actsandgures Detail information on the RDS UV Dimensions Length incl. inlet and outlet: 1990 mm Width: 1540 mm Height: 1900 mm Exhaust air Exhaust volume flow rate: max. 1200 m³/h Pressure: 5 mbar Conveyor Conveyor …
Technical details
Overview of the RDS UV
The RDS UV system can be equipped with different lamps
to suit the customer’s requirements. The following lamps
are available: medium-pressure undoped mercury lamps,
doped UV lamps, UV LED arrays, and special lamps that
emit specic light spectrums. Lamps can be installed above
and/or below the conveyor. Depending on the required con-
veyor width, the system can also be equipped with lamps
of different lengths. This offers the highest possible level of
flexibility and makes production efcient and cost-effective.
The standard RDS UV system is equipped with medium-
pressure undoped mercury lamps. The lamps have a lifespan
of over 8,000 hours. The distance between the conveyor and
the lamps can be freely adjusted from 50 mm to 100 mm.
› High power desity
› Suitable for continuous operation
› Low energy consumption in standby mode
› Quick start-up from standby mode
Medium-pressure mercury lamps
High-performance lamps in the RDS UV system dry all types
of UV coating
Transport
Three-part transport for high throughput
The standard RDS UV system is equipped with a pin-chain
conveyor system. The conveyor system can be adjusted to
suit your components, regardless of the geometry of circuit
boards. The conveyor’s tracks and speed are also fully
adjustable. The three-part transport enables a higher
throughput, as the running direction parallel to the lamp
allows double the speed.
› Secure,stableconveyorsystem
› Adjustableconveyorheight+/-100mm
› Conveyorwidth80–480mm
› Quick start-up from standby mode
› Safetysluicesininlet/outlet
Factsandgures
Detail information on the RDS UV
Dimensions
Length incl. inlet and outlet: 1990 mm
Width: 1540 mm
Height: 1900 mm
Exhaust air
Exhaust volume flow rate: max. 1200 m³/h
Pressure: 5 mbar
Conveyor
Conveyor height: 950 mm ± 50 mm
Conveyor width: 80 – 480 mm
Speed: 300 - 10.000 mm/min.
Clearance above/below: 100 mm
Max. component clearance: ± 100 mm
Our RDS UV system is highly accessible for minimum main-
tenance effort. The system casing and the dryer’s doors can
be opened. All electronic and mechanical components on
the back of the system are neatly arranged, which allows for
easy maintenance.
Easy maintenance
low
maintenance
expenses
The ViCON operating software of the RDS UV dryer has an
intuitive touch interface, which considerably reduces con-
guration and operator training costs. All the relevant para-
meters are visible at a glance on the main screen with its
machine view. Using corresponding tools you can document
the drying process by product and integrate this into your
traceability programme. Extensive documentation can be re-
trieved in just a few clicks. It also offers password-protected
administration with several levels, language selection, data
display and maintenance logs.
Smart Software
Compact and high in quality
The new RDS UV curing system
Applying a protective coating improves the reliability and
lifespan of your products. The coating improves your compo-
nents’ surface insulation resistance and protects electronic
components from aggressive environmental influences.
Rehm has developed an innovative UV dryer for curing
all types of UV coating and adhesives. Depending on the
material requirement, the system is available with UV curing
lamps with either medium-pressure mercury lamps or UV
LED lamps. Thanks to its compact design, the system can
be adapted to suit any production environment.
Future-oriented system due to small footprint
Stable process for reliable results
Quick hardening within seconds
Optimal application of energy due to energy source adjustable in height
Lightsourceswithspecicwavelengthsandlonglife
Low energy consumption in standby mode
Low maintenance
Three-part transport for high throughput