OperatorManual.pdf - 第4页
Vitronics-Soltec service facilities AUTHORIZED VITR ONICS / SO LTEC SERVICE FACILITIES The Vitronics- Soltec service sites ar e: Europe VITRONICS SOLTEC BV Karolusstraat 20 4903 RJ Oosterhout the Netherland s tel. +31-16…
Introduction
THIS MANUAL APPLIES TO
THE VITRONICS OVEN CONTROL SOFTWARE
for Windows
OVEN CONTROL SOFTWARE
The Vitronics Control Program for Windows is a multi-tasking, real time operating system with a multi-
lingual user interface and animated graphics in a windowing environment. It runs on a standard IBM PC
SVGA compatible computer system.
The Vitronics Oven Control Software provides a data management system for storing and displaying oven
information. The operator controls the oven with the computer keyboard and trackball.
This Vitronics Oven control Program will operate properly on Windows Regional Setting: English
(United States)
Operator manual 3 August 2003
Vitronics-Soltec service facilities
AUTHORIZED VITRONICS / SOLTEC SERVICE FACILITIES
The Vitronics- Soltec service sites are:
Europe
VITRONICS SOLTEC BV
Karolusstraat 20
4903 RJ Oosterhout
the Netherlands
tel. +31-162-483000
fax +31-162-483253
helpdesk@nl.vitronics-soltec.com
Americas
VITRONICS SOLTEC Inc
2 Marin Way
Stratham, NH 03885
United States
tel. +1-603-772-7778
fax +1-603-772-9319
helpdesk@us.vitronics-soltec.com
Germany
VITRONICS SOLTEC GmbH
A
n der Kohlerei 7
97828 Marktheidenfeld
Germany
tel. +49-9391-98820
fax +49-9391-988228
helpdesk@de.vitronics-soltec.com
Asia Pacific
VITRONICS SOLTEC PTE LTD.
135 Joo Seng Road
PM Industrial Building #02-01
Singapore 368363
tel. +65-484-3010
fax +65-484-1910
helpdesk@sg.vitronics-soltec.com
Operator manual 4 August 2003
Operator control panel
Some Oven Models may have differently shaped Control Panels and may not have ALL the functions shown
here.
NOTICE
WHEN CONTROL POWER IS INTERUPTED, PARTS OF THE OVEN ARE ELECTRICALLY
POWERED AND DANGEREROUS TO PERSONNEL !!!
EMERGENCY STOP
BUTTON
(E-STOP)
INTERRUPTS
CONTROL
POWE
R
XPM
THERMOCOUPLE INPUTS
FOR OVEN PROFILING
KEY SWITCH
RAISES AND
LOWERS THE
OVEN HOOD
SELECTOR
SWITCH
ADJUSTS
RAIL AND
CENTER
BOARD
SUPPORT IN OR
OUT
XPM²
The XPM2 control panel is located on the keyboard/moniter swing arm, while the E-stop is located on the oven
itself.
Operator manual 5 August 2003