00197366-02_IM_WES7_DE_EN.pdf - 第9页

W indows Em bedded Stand ard 7 / Installa tion Manu al Ausgabe 11/2014 Edit ion 9 4.2 Performing B IOS U pdate/ S etti ngs on the M achine C omput er a nd Visi on C omputer A BIOS u pdate sha ll onl y be perf orm ed if r…

Windows Embedded Standard 7 / Installation Manual Ausgabe 11/2014 Edition

4 Installation for CPU 627C/827C

4.1 Overview

Install Boot DVD

Choose computer configuration

SIPLACE WES7 Configurator CD

Install and calibrate Touchscreen

BIOS settings on the machine/Vision

computer

Perform BIOS settings

Back up the machine data

BIOS update on the machine/Vision

computer

Perform BIOS update

Restore DVD

Win.Emb.Std.7

627C/827C

Restore the initial configuration

See section 4.2.

Installing the operation system Windows

Embedded Standard 7, see section 4.3.

See section 4.3.2.

See section 5.

See section 6.

Windows Embedded Standard 7 / Installation Manual Ausgabe 11/2014 Edition

4.2 Performing BIOS Update/Settings on the Machine Computer and

Vision Computer

A BIOS update shall only be performed if requested. Currently, there is no need to perform a BIOS

update on the "C" type computers.

► Perform the BIOS settings as follows.

The following steps have to be performed before installing Windows Embedded Standard 7:

► Press the F2 key to access BIOS after the computer has started.

► Press the F9 key (Setup Default) to set the default settings.

► Change the BIOS settings as described in the following section.

4.2.1 BIOS Settings for 627C / 827C BoxPCs with 70x Station Software Version

► Set the following values in BIOS:

Under Power:

Wake up on PME/LAN 2 [ Disabled ]

Under Boot:

USB-Boot [ Enabled ]

Under Boot / Legacy Boot Type Order the following boot priority sequence:

1: USB ODD

2: SATA0 HDD

3: ...

Under Advanced / CPU-configuration:

CMP-Support (= Core Multi Processing)

[ Auto ]

► Perform the following items unter Exit successively:

► Confirm Save User Profile with [Yes].

► Confirm Load User Profile with [Yes].

► Exit BIOS with Exit / Exit saving changes / Yes.

Windows Embedded Standard 7 / Installation Manual Ausgabe 11/2014 Edition

4.3 Installing the Windows Embedded Standard 7 Operating System

NOTICE

Before you start work, ensure that the DVD drive is set as the first boot device in the

BIOS to allow the computer to be booted from DVD.

► If necessary, back up the machine data manually.

If you install Windows Embedded Standard 7 on a Vision computer, the following steps have to

be performed:

► Disconnect the keyboard from the machine computer and connect it to the Vision computer.

► Switch the video multiplexer to the Vision computer.

► Unplug the USB cable for the DVD drive from the machine computer and plug it into the Vision

computer.

4.3.1 Installing the Installation DVD

► Insert the "Win.Emb.Std.7 627C/827C" installation DVD into the DVD drive.

► Switch on the computer to start it from the DVD or reboot the computer, if it was already

switched on.

► Press any key, when the message Press any key to boot from CD Rom is displayed.

► Follow the instructions of the Restore Installation procedure.

Selection of Restore options:

If the system partition size is too small on the hard disk, it is only possible to delete or re-partition

the complete hard disk (message Complete hard disk recovery).

It the system partition is big enough, the Choose Recovery Option message is displayed and

one of the following options may be selected:

1. Restore existing system partition only

The system partition will be restored only.

2. Restore complete system disk

The complete hard disk will be restored.

► Select an option and confirm your selection with OK (or cancel your selection with Cancel).

The operating system is installed (may take some minutes) and thereafter the computer is

automatically rebooted several times.

When the Windows login window is displayed, the installation is completed (the first reboot may

take some minutes).

► Remove the DVD from the DVD drive.

► Insert the "SIPLACE WES7 Configurator" software CD into the DVD drive.

► Log on as "ASM_Admin" and enter a password.