TK24668.Same Board Name Taking Over LotPartsLog.pdf - 第4页

SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD. MDOC-SOFT50128 4/4  4. Det ails 4.1. Operation when Board Data is selected When you s elect the same board dat a with the [BOARD] button, “Board Cou…

100%1 / 4
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
2/4
1.
Target Model and Version
The target model and version are as follows.
Table1.1 Target model and version
Target Model, Software Target Version Remarks
YS Series Mounter, YG300
YG12 Series Mounter, YSP,
YSP20, YSH20, YC8
VGOS V3.41STD R1.000 and later
2. Summary
The “Same Board Name taking over LotPartsLog” function takes over “Board Count”, “Board
Log” and “Program Log”, when the next board data matches the currently board data.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
3/4
3. Settings
Settings to use this function are as follows.
3.1. Software settings
On the [Setup] - [Software Setting] - [History] - [History] dialog, check either of the check boxes
in the [Same Board Name taking over LotPartsLog] area.
Manual Switch Board : Lot is taken over when the [Board] button is pressed.
Auto Plan Switch Board : Lot is taken over when board data is changed by Automatic
Program Changeover.
Fig.3.1 Setting Detail History
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
4/4
4. Details
4.1. Operation when Board Data is selected
When you select the same board data with the [BOARD] button, “Board Count”, “Board Log” and
“Program Log” are taken over without cleared.
On a dual-lane machine, lot is taken over by board data of each lane.
Fig.4.1 “Ea2965: The Board Data of the same name was chosen” message
When board data with the same name is chosen, “Ea2965: The Board Data of the same name
was chosen” (Fig.4.1) is displayed.
If you don’t need to display this message, check the [Don’t show this warning dialog anyone]
check box, so that this message is no longer displayed at take-over.
5. Limitations
There is no limitation at using this function.