CNL3098.pdf - 第3页

Simple, Auto matic Operat ion Th e EcoD r y co mpo und d r yer i s contro lle d by a PID clo sed- loo p tempe ratu re contro lle r , wh ich a utomati cal ly c ontrol s the cor rec t he ating of the e nd s with m inim al …

100%1 / 4
Energy Efficiency and Savings
The EcoDry compound dryer runs on a lower wattage than
standard dryers while 85 to 90 percent of the power consumed
is used directly to heat the ends, making it the economical
choice in smaller production environments. The system can cure
up to 475 can ends per minute (per lane).
Instant-on/instant-off heating not only gives consistent drying
for a quality product, but also contributes to energy savings by
substantially reducing energy waste by shutting off during line
stoppages. The EcoDry compound dryer starts instantly when
the line restarts and requires no preheating time, so energy is
used only when ends are in the unit.
Since the ends are not heating when the line stops, they do not
lose buckle strength, which is common with convection ovens.
Buckle strength drops when aluminum ends are held at high
temperatures for an extended period of time. The lighter weight
metals in use today are particularly sensitive to overheating.
Economical, Compact Size,
Straight-Through Design
The EcoDry compound dryer runs more efficiently, at a lower
wattage than our regular ICD-model dryers, and its compact
size allows for easy retrofit to existing end lines without major
modifications.
The straight-through tube virtually eliminates the problem of
line stoppages due to ends jamming in the dryer. Ends are
heated in stick, which protects the compound from damage
during drying. With many conventional dryers, the ends follow
a snake-shaped path inside the dryer, which can lead to line
jams and damaged curls.
Warm air is blown through the EcoDry’s heating tube while
the ends are heated inductively. The heated air, although not
needed to heat the ends, aids in the removal of water vapor
as it evaporates from the compound. Even without visible
separation, water evaporates and escapes from the slight gap
between ends. The flow of warm air in the tube continuously
removes water vapor and condensation, allowing the drying
process to continue rapidly.
KEY
WARM AIR FLOW .....................................................
METAL .......................................................................
SATURATED WATER VAPOR .................................
COMPOUND ..............................................................
HEAT ..........................................................................
Ends are heated in stick, to protect the compound
from damage during the drying process.
Compound drying using induction heat
Simple, Automatic Operation
The EcoDry compound dryer is controlled by a PID closed-
loop temperature controller, which automatically controls the
correct heating of the ends with minimal operator intervention.
This provides consistent
drying without the seasonal
variations typical of convection
ovens. During start-up, a PLC
performs an extensive self-
diagnostic check for proper
operation of the unit.
The unit monitors the heating and safety components on a
continuous basis for safe, reliable operation. In the event of
an electronic malfunction, fault indicators on the control panel
are provided to identify the source of the malfunction for fast
troubleshooting with minimal downtime.
Product Flow
Air Heater Duct
Air Heater Duct
Exhaust
Operating Parameters
Dimensions: Length
Width
Height
45 in. (1143 mm) without separator
24 in. (610 mm)
46 in.* (1170 mm)
* varies with line height
Voltage 380-480 VAC 50 or 60 Hz
Wattage up to 12 kW
Single-lane can size range 2 in. (52 mm) to 6.8 in. (175 mm)
Dual-lane can size range 2 in. (52 mm) to 4.3 in. (109 mm)
Optional Features
S-1 magnetic separator for steel ends only
EcoDry Model Numbers
ECD-SS-S0
EcoDry, single lane, small tool set,
no separator
ECD-SS-S1
EcoDry, single lane, small tool set,
with separator
ECD-SL-S0
EcoDry, single lane, large tool set,
no separator
ECD-SL-S1
EcoDry, single lane, large tool set,
with separator
ECD-DS-S0
EcoDry, dual lane, small tool set,
no separator
ECD-DS-S1
EcoDry, dual lane, small tool set,
with separator
1 Air is taken into the base area
for pressurizing
2 Pressurized air cools the coils
3 Warm air is ducted through
the make-up heater
4 Heated air is ducted over the ends
to remove moisture
5 Moisture-laden air is removed from
induction tube with exhaust blower
6 Optional magnetic separator uses
heated air to absorb residual moisture
as ends are separated
System Airflow
© 2018 Nordson Corporation I All Rights Reserved I CNL-18-3098 I Revised 3/18
Nordson Industrial Coating Systems
100 Nordson Drive
Amherst, OH 44001
USA
Find your local Nordson office:
www.nordson.com/icslocations
Phone: +1.440.985.4000
www.nordson.com/ics
/NordsonICS
/Nordson_Coating
/company/nordson-industrial-coating-systems
Why choose Nordson
In highly competitive manufacturing markets, productivity is
vital and performance is essential. That’s why we apply both
to everything we do, whether it’s our products, expertise
or outstanding customer service. We’ll always be there to
help maintain the new standards you’ve set, with expert
service and support delivered through our teams working
across the globe.
This unique Nordson approach helps you reach new levels
of production, while working more accurately, efficiently and
competitively than ever. Precisely why manufacturers who
demand quality, can rely on Nordson.
Safe, Consistent Operation
The patented induction-heating method operates at frequencies
well below 20 KHz. The lower frequency of the EcoDry dryer
provides safe, controllable heating deep within the ends,
providing fast, thorough drying.
Magnetic Separator for Steel Ends
An optional magnetic separator located at the dryer exit
accelerates the drying of steel ends. Carefully calibrated,
permanent magnetic arrays separate the ends while warm
air is blown between them. Ends are heated safely in stick
then separated. The warm air dries compounds quickly at the
point where the moisture is most easily removed. The magnetic
separator has no moving parts for simple, reliable operation.
Certifications
ANAB ISO 9001,TUV/CE, TUV/US
The EcoDry dryer for induction end-compound is available
as single - or dual-lane units and accommodates a variety
of lane configurations.
Dual Lane ConfigurationsSingle Lane
8
ACCREDITED