ALD6700S-Brochure-LR.pdf
THE BEST SOLUTION FOR HIGH LEVEL SMT LINES Precise measurement simultaneously in 2D and 3D Automatic real-time warpage compensation Programming time of less than 5 min Training time less than 1 hour Fast inspection Excep…
THE BEST SOLUTION FOR HIGH LEVEL SMT LINES
Precise measurement
simultaneously in 2D and 3D
Automatic real-time
warpage compensation
Programming time
of less than 5 min
Training time less than 1 hour
Fast inspection
Exceptionally high MTBF
►
►
►
►
►
►
GREAT PERFORMANCE, SIMPLE OPERATION
ALD6700S SERIES
3D Solder Paste Inspection systems
Beyond Innovation
Beyond Innovation
The unique optical system developed by ALeader delivers an accurate, reliable 3D
measurement and top-quality high-resolution 2D image
• Bi-directional structured light (advanced phase-shifting
digital projection system, developed in-house)
• Multi-directional (360˚ horizontal, 0-90˚ vertical)
LED illumination system
• High-speed camera
Simultaneous 2D and 3D inspection guarantees full inspection coverage with
the most accurate measurement of the paste deposits height, area and volume
The superior high-resolution image, generated
by the high-speed camera and the unique
lighting system, clearly distinguishes between
the pastes, pads, silkscreen and the board.
Innovative, real-time automatic warpage compensation and measurement floor
recognition method. The system identifies the pads as a zero level for the paste height
measurement for each board and FOV. Such a capability completely eliminates the
influence of PCB warpage on the inspection result. The process is completely automatic
and user-independent, no bare board or any special procedures are required.
PCB warpage does not affect the measurement
result, system provides precise paste height
from the pad level
Precise height measurement based on Phase
Measurement Profilometry (PMP).
Bi-directional phase shifting projection system
ensures accurate and noise resistant
measurement of the paste height and volume.
FOV uniformity Insensitivity to PCB color
Over 90% brightness uniformity across the FOV. High
measurement accuracy is consistent throughout all
parts of the PCB
Accurate measurement
– same result
ALeader’s SPI advanced optical system guarantees
the same superior level of performance on PCBs of
any color
Beyond Innovation
Easy and fast, wizard based programming
Structured and clearly defined access level
Alerts and feedback
for continuous
printing process
improvement
Communication
with the pick and
place systems
• Operator – Production, Process
• Programmer – Production, Process, Setup
• Administrator – Production, Process, Setup, Config,
HW and Diagnostic
Real-time built-in SPC as a standard
• Height map for each PCB
• Real-time monitoring charts for height, volume, area and offset
• History review and analysis
• Closed loop with the printer
• Communication with the P&P
• Alerts
• Less than 5 min to start production for a new product, with a friendly and intuitive user interface.
• Takes less than an hour to train a new user to program and operate the system.
• Possible to create a program without Gerber using a good board sample only (auto programming).
• Global quality settings based on paste size and stencil thickness are automatically adopted for
each new program, delivering the same high-quality programs despite having been written by a
different user.