PSE_300_2HD_TI_EN.pdf - 第3页
Main standard features □ PowerSpray ® technology bundle: magnetically coupled S-Power pump units (tank A, tank B), twofold ASYNCHRO ® volume- spray rotorsystem with PUSHFORCE ® nozzles, "Option100" softwareprog…
Most suitableOptional suitable Optional suitable Not suitable Not suitable
Cleaning (key process 1): From the cleaning tank (A) the cleaner liquid is sucked by a magnetically coupled pump unit and
routed with a controllable volume flow through a separate circuit into the ASYNCHRO
®
spray rotor nozzles. Their geometry
ensures a comprehensive and thorough cleaning, even in inaccessible and critical aereas. After the washing procedure, the
valve switchover of the process chamber undocks the cleaning circuit until the next process run.
Rinsing with tap water (key process 2): From the rinsing tank (tank B) the water is pumped through the separate second cir-
cuit into the spray rotors. Tap water has (compared to DI / DM water) the advantage of lower surface tension and thus flushes
also critical points as low standoffs and appertures more efficient.
Drying (key process 3): Drying is carried out by a HotSpeed warm air unit with fan and heating coil in a single air duct. The
residual moisture on the product is evaporated at 40 - 45 °C (104 - 113 °F).
Cycle time (approx. 30 min.) depending on medium selection or degree of contamination
Maintenance: The system has two large maintenance doors on the right and left side. The maintenance room contains,
among other things, the pump-off unit and the optional re-dosage unit with space for a 25 l detergent canister. The tank levels
as well as pressure values and maintenance cycles are monitored by the PLC and displayed on the monitor.
Page 2 of 4
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and ASYNCHRO
®
double rotor system
11/2021
PSE 300 2HD
Made in Germany
CLEANING TECHNOLOGY
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
Application overview
Assembled PCBs
Hybrids
Misprints
Stencils
Screens, PumpPrints
Misprints
Solder frames
Solder carriers
Solder masks
ESD Boxes
Containers
Magazines
Condensation traps
Filters
Steel sheets
Optional suitable applications can also be optimally realized with the appropriate options.
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021
Main standard features
□ PowerSpray
®
technology bundle: magnetically coupled S-Power pump units (tank A, tank B), twofold ASYNCHRO
®
volume-
spray rotorsystem with PUSHFORCE
®
nozzles, "Option100" softwareprogram (100 freely selectable programs)
□ EATON Programmable Logic Controller (PLC)
□ High resolution 3.5" touch display
□ Full flow coarse filter (process chamber)
□ Sediment filter for cleaning tank (A)
□ HotSpee warm air dryer
□ ClosedLoop reprocessing of cleaning and rinsing fluids
□ Safety features: safety interlock on the process chamber door, overflow alarm for all tank sections, overheating protection for
all heating and drying elements, end switches for all motor-driven valves and drives, personnel protection insulation
□ Front cover made of stainless steel, side and rear covers in painted steel
□ Process sections made of electrolysis resistant elements
Main options
□ Automatic re-dosage unit for 25 l detergent container
□ Drip & storage reservoir
□ Exchange for rinse water and pump out unit
□ Exhaust control
□ Status light fivefold to display the current process state
Page 3 of 4
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and ASYNCHRO
®
double rotor system
11/2021
PSE 300 2HD
Made in Germany
CLEANING TECHNOLOGY
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021
Technical data
Technology base kolb PowerSpray
®
Capacity per process cycle Screen, stencil, carrier, washing frame up to 950 x 780 mm (37.5" x 31")
Process chamber dimensions W 350 • D 980 • H 920 mm (W 13.78" • 38.58" • H 36.22")
Volume tank A (cleaning) 75 l
Volume tank B (rinsing) 75 l
Power supply 400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz
Power consumption ca. 4 - 9 kW (depending on options)
Control system PLC (Eaton E4 XV102)
Temperature load up to 50 °C (122 °F)
Filter system
up to three stages - 1. Full flow coarse filter < 2 mm (0.08"), 2. Sediment filter
inside the tank, 3. 20“ fine filter (1 - 100µm - process dependent)
Supply connection 1 (tap water)
connection for 1/2" hose, 30µm water filter (prov. by customer: inlet water quali-
ty < 350 μS conductance value (< 10° dH)
Rinse water drain connection (with integrated pump out system) connection for 1" hose
Exhaust connection Ø 160 mm (6.3"), exhaust capacity 200 - 300 m³ / h (7,063 - 10,595 ft³ / h)
Footprint 950 x 1,600 mm (37.4" x 63")
Operating condition room temperature 20 - 35 °C (68 - 95 °F)
Operating noise 63 dB (A)
Empty weight 570 kg (1,257 lbs)
Page 4 of 4
Part number: 0905PSE31HD2
Fully automatic two-tank economy system with two separate
circuits and fourfold ASYNCHRO
®
rotor system
11/2021
PSE 300 2HD
Made in Germany
CLEANING TECHNOLOGY
kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich ▪ Phone: +49 (0) 2154 9479 - 38 ▪ Fax: +49 (0) 2154 9479 - 47 ▪ e-mail: info@kolb-ct.com ▪ www.kolb-ct.com
All rights for changes reserved that lead to technical improvement. © kolb GmbH 2021