MN_A_MANUAL.pdf - 第3页
Main menu Exit 1 Reset settings 2 Station settings 3 Tool settings Station settings 1 Temp unit Celsius 2 Maximum temp 400 0 C 3 Minimum temp 200 0 C 4 Nitrogen mode ON N 2 outlet Description Th e MN is a n ele ctrova lv…
Nitrogen Gas Circuit Electric Circuit
Control Unit
Ref. DI, DD, DDR, DM
Stand
Ref. DN-SE
Nitrogen Handpiece
Ref. T245-NA
Nitrogen Flow Regulator
Ref. MN-A
Power
Cord
Socket
Nitrogen Generator
Ref. GN-A
Compressed
Air Inlet
or
Handpiece
N
2
tube
from N
2
net
Module cable
connector
Ref. 0010207
Stand cable connector R ef. 0 01128 3
N
2
pressure range
supply 3 to 6 bar
6 bar MAX
Nitrogen Flow Regulator
Ref. MN-A
Packing List
Connection
The following items should be included:
Nitrogen Flow
Regulator ........................ 1 unit
Ref. MN-A
Module Cable
connector ........................ 1 unit
Ref. 0010207
Manual ............................. 1 unit
Ref. 0009191
2
www.jbctools.com
Main menu
Exit
1 Reset settings
2
Station settings
3
Tool settings
Station settings
1 Temp unit
Celsius
2
Maximum temp 400
0
C
3
Minimum temp 200
0
C
4
Nitrogen mode ON
N
2
outlet
Description
The MN is an electrovalve controlled by the soldering station that allows you to solder with nitrogen
with a minimum gas consumption.
Once the MN-A (Nitrogen Flow Regulator) has been connected to the Control Unit, enter into the
Station Settings menu and switch on the Nitrogen Mode.
The module will let the gas flow when taking out the tool from the stand and turning off when the
tool is again placed in its stand and reaches the sleep temperature.
Connection to
soldering station
Recommended N
2
flow:
1-2 liters/minute
N
2
flow control
Pressure range supply
3-6 bar
Maximum pressure
6 bar
www.jbctools.com
3
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
0009191-0118
- Weight: 1,142 kg (2.51 lb)
- Dimensions: 50 x 120 x 130 mm (1.97 x 4.72 x 5.12 in)
- Voltage (AC): 24V (from control unit)
- Power: 3W
- N2 flow regulation: 0,5 - 3,5 SLPM (5 Bar)
- Max. Pressure 6 bar
- Ambient operating temperature: 10 - 40 ºC (50 - 104 ºF)
Complies with CE standards.
ESD protected.
Specifications
www.jbctools.com